57
1. POWER button
• Turns the device on and off.
2. POSITION button
• Selects the position to store a scene in
memory for Multi-Print.
3. ID number
• Displays the selected device's ID
number.
4. Message display
• Displays the operating mode of the
selected device.
5. MULTI-PIX button
• Select by clicking (
¶
/
Ä
) button.
OFF : Single print
4
: 4 shots on one sheet
16
: 16 shots on one sheet
6. CONTENT button
• Select by clicking (
¶
/
Ä
) button.
STROBE
: Stores the selected number of
images at short intervals, and
prints them all on one sheet.
SELECTED : Prints 4 or 16 selected scenes
on one sheet.
SAME
: Prints the same scene 4 or 16
times on one sheet.
7. STROBE SPEED button
• Effective when "STROBE" is selected
from "CONTENT".
HIGH : When printing in the Strobe Print
mode, the GV-PT1 stores scenes
at intervals of approximately 1/4
second and the GV-PT2 at
intervals of approximately 1/15
second.
LOW : When printing in the Strobe Print
mode, scenes are stored at
intervals of approximately 1/2
second.
8. PIX STABILIZER button
ON
: If the scene you want to print is
jittery, select "ON" to stabilize it.
OFF : Usually set to "OFF".
9. STORE button
• Stores scenes and titles you want to
print in the video printer's memory.
10. PRINT/EQ (equalization) button
•
Displays either "PRINT" or "EQ" on
screen depending on the connected
JVC Video Printer equipped with
JLIP connector.
PRINT:
• Print command is available.
EQ (equalization):
• Adjusts picture equalization.
• Video printer does not have this
function.
11. SELECT (scene select) button
• Switches between "SOURCE" (images
from camcorder or VCR) and
"MEMORY" (scenes stored in memory)
for display on TV monitor.
12. CLOSE button
• Closes the "Video Printer" window.
Summary of Contents for GV-DS1
Page 40: ...40 MEMO ...
