20
EN
LOADING THE BLANK PAPER
Loading Blank Paper
To print, load Blank paper sheet set.
1
OPEN PAPER COMPARTMENT
DOOR
•Slide the paper compartment door switch in
the direction of the arrow to open the paper
compartment door.
2
LOAD BLANK PAPER
•Riffle through the paper so that each sheet is
separated from the next and place it with the
printing surface (white side) facing inside.
•Make sure that the paper does not rise above
tab A .
3
CLOSE THE PAPER COMPARTMENT
DOOR
•Make sure that the paper has been correctly
loaded.
•The door clicks into place when the door is
properly closed.
Notes: • Read the instructions on the printing paper and ink kit, and the “Caution on Loading
Printing Paper” on the inside of the printing paper compartment.
• Loading printing paper
Since the paper cannot be properly fed if each sheet sticks together, riffle through the
paper before loading it and make sure that the paper ends are aligned.
If the message, “Load paper” is displayed when there is paper in the paper
compartment, reload the paper.
Printing surface
(white side)
OPEN
1, 3
2
OPEN
A
· Make sure that the paper does not
rise above tab .
· Place the side with the text face up.
· Number of sheets: max. 15 sheets
Notes:
A
Summary of Contents for GV-HT1E
Page 46: ...EN 45 MEMO ...