JVC GV-PT1, Instructions Manual

23

4

LOCATE/STORE INSET IMAGE

Press PICTURE SELECT to return to the source
image display. Then fast-forward or rewind to
locate the desired image, and press MEMORY.
•To add more insets to the main image, repeat

steps 3 and 4.

5

PRINT IMAGE

Insert a print sheet with the print side (the side
with no writing on it) UP into the insertion slot
until it is pulled in automatically.
•The Print Lamp lights, indicating printing is

in progress.

•“NOW PRINTING” appears on screen, on a

blue background.

•When the Print Lamp starts blinking, printing

is complete. Remove the print from the exit
slot. The Print Lamp goes out.

If the stored image is shaky . . .

..... set “PIX STABILIZER” in the Print Menu to “ON”. This should stabilize the image.

If you want to add an inset to a 4-scene print . . .

..... set “MULTI PIX” to “4” in step 1, then change the setting to “16” in step 2. This results in a 1/16-size

inset on a 1/4-size scene.

If you want to switch between the image being input and the stored image  . . .

..... press PICTURE SELECT. The input image and the stored image appear on the connected TV alternately.

* During printing, the image being input alternates with “NOW PRINTING” (appears on a blue background).
* During printing, noise or color changing may be visible on the connected TV. This is normal and

does not affect printing.

If you store the wrong scene . . .

..... press PICTURE SELECT and the stored scene appears on screen. Then press SET +/–  to cycle

through the scenes until the incorrect one appears, and press PICTURE SELECT again to return to the
source image display. You can now store the scene you want in its place.

To print multiple copies of the same image . . .

..... after the first print sheet comes out the exit slot, put another in the insertion slot and print as before.

* Do not attempt to insert a print sheet during printing, as this can result in malfunctions.

To print a “live” image using a camcorder as the source . . .

..... in steps 1 and 4, instead of playing back the source tape, engage the camcorder’s Record mode. If

you’re using a JVC camcorder, you can store a scene you want to print by pressing the camcorder’s
Start/Stop button (in place of the GV-PT1’s MEMORY button). Connect the camcorder’s Editing
connector to the PAUSE Connector on the GV-PT1 using the camcorder’s supplied Editing cable (or
a commercially available 

φ

 3.5 Mini plug cable).