JVC GY-HM850CHE Instructions Manual Download

Page: 73 / 220

Time Code Operation Mode

Three types of time code operation (“FREE”,

“REC”, “REGEN”) can be selected with the [TC

GENE.] switch.

Setting

Description

FREE

The time code operates in the

run mode at all times

regardless of the recording

status.

It continues to run even when

the power of the camera

recorder is turned off.

Synchronizes with the external

time code when an external

time code generator is

connected.

(

P78 [Synchronizing the

Time Code with an External

Time Code Generator] )

REC

The time code operates in the run

mode during recording. It

continues to run in the order of the

recorded clips as long as the SD

card is not replaced. If the SD card

is removed and recording is made

on another card, time code will be

recorded on the new card from

where it was left off in the previous

card.

REGEN

The time code operates in the run

mode during recording. When the

SD card is replaced, the last time

code recorded on the card is read

and recorded on a new card so that

the time code continues in running

order.

(

P74 [Presetting the Time

Code] )

Memo :

When [Main Menu]

[System]

[Record Set]

[Rec Mode] is set to “Variable Frame”,

“Interval Rec” or “Frame Rec”, and the [TC

GENE.] switch is set to “FREE”, Rec Run mode

is activated.

(

P135 [ Rec Mode ] )

When [Main Menu]

[System]

[Record Set]

[Record Format]

[

Format]/[

Format] is

set to “AVCHD”, Pre Rec enters Free Run mode.

Setting Time Code

Generator

Presetting the Time Code

Time code and user’s bit data generated from

the internal time code generator are recorded.

This section describes how to set [TC/UB]

[TC

Preset].

(

P119 [ TC Preset ] )

Memo :

When the frame rate in [Main Menu]

[System]

[Record Set]

[Record Format]

[

Frame

& Bit Rate]/[

Frame & Bit Rate] is set to “50p”,

“50i”, “25p” or “24p”, setting to “Drop” is

disabled.

You can configure the setting without accessing

the [TC/UB] menu screen.

(

P75 [Setting Time Code without Opening

the Menu] )

Required Settings Before Preset

Set the [TC GENE.] switch to “REC” or

“FREE”.

[REC]:

Preset data in the time code generator

operates in run mode during recording

mode. Set this when recording continuous

time code in connecting frames.

[FREE]:

Time code starts to operate in run mode from

the preset time in the time code generator.

Time Code and User’s Bit

ooting

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands