background image

15

ENGLISH

 When Using an SD Card

If you want to record to an SD card, the 
following three operations need to be 
performed.

Compatible SD cards:
Panasonic, TOSHIBA,  pqi

 (still image only) 

and 

SanDisk

. 128 MB to 4 GB. 

 If other media are used, they may fail to 

record data correctly, or they may lose data 
that had already been recorded.

 For video recording, use a high-speed SD 

card (at least 10 MB/s).

 MultiMediaCards are not supported.

Q

 Insert an SD card

Preparation:

 

Set the power/mode switch to 

OFF

.

1

  Open the SD card cover.

Bottom of the 
Camera

2

  Firmly insert the card with its clipped 

edge fi rst.

Clipped Edge

3

  Close the SD card cover.

8

 To remove an SD card

Push the SD card once.
After the card comes out a little, pull it out.

NOTES

 Insert and remove the SD card only while 

the power is turned off. Otherwise, data on 
the card may be corrupted.

 Do not touch the terminal on the reverse 

side of the label.

R

 Change the recording medium

The camera is programmed to record on the 
built-in hard disk when it is shipped from the 
factory. You can change the recording medium 
to SD card.

Set [REC MEDIA FOR VIDEO] and [REC 
MEDIA FOR IMAGE] to [SD]. (

 pg. 47, 

48)

S

 Format an SD card when using it for 

the fi rst time

This will also ensure stable speeds and 
operation when accessing the SD card.

Select [EXECUTE] in [FORMAT SD 
CARD] to format the card. (

 pg. 50)

Summary of Contents for GZ-MG132E/EK





























































Reviews: