(No.YF226<Rev.002>)1-9
3.2.2 Assembly/Dissambly of cabinet parts and electrical parts
z
Disassembly procedure
NOTE1:
When removing the BOTTOM COVER ASSY, open and pull
up the COVER (SD).
NOTE2a:
Pull out the GRIP BELT from the hook and leave it released
before removing the HDD COVER ASSY.
NOTE2b:
During the procedure, be careful not to damage the parts.
NOTE3:
When attaching, be careful not to pinch the parts.
NOTE5a:
During the procedure, be careful in handling the parts.
Pay special attention not to give any external shock to the
HDD.
NOTE5b:
When the HDD is replaced, be sure to refer to Replacing
HDD in "SECTION2 SPECIFIC SERVICE INSTRUCTIONS"
for the procedure after HDD replacement.
NOTE5c:
Be careful as the RUBBER SPACERS on both sides are
easily come off when the HDD is removed from the main
unit.
NOTE5d:
When connecting the FPC to the connector, insert the FPC
straight into the connector. When locking the connector, be
careful not to give so much load that it bends the board.
NOTE5e:
In this procedure, the FPC connected to the HDD connector
is not removed.
If the FPC is removed due to broken wire, be careful in at-
tachment direction.
Pay attention as wrong attachment could damage the HDD.
NOTE5f:
Be careful with the wiring.
NOTE7:
When removing the REAR COVER ASSY, remove the
ZOOM UNIT together with the REAR BOARD ASSY.
NOTE8:
When attaching, first adjust the AV jack position, and then
carefully adjust the DC jack position.
NOTE9:
During the procedure, be careful not to touch or damage the
battery terminal.
NOTE10a:
When removing, release the connector lock, and then pull
out the FPC together with the UPPER ASSY.
NOTE10b:
Please refer to Fig.3-2-13 and the following procedure for re-
moving the UPPER ASSY.
NOTE11a:
When attaching, be careful in handling the JACK COVER
(USB) ASSY.
NOTE11b:
When attaching, be careful with the wiring (MIC).
NOTE12:
When attaching, be careful with the wiring (MIC).
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
3-2-1
3-2-2
3-2-3
3-2-4
3-2-5
3-2-6
3-2-7
3-2-8
3-2-9
3-2-10
3-2-11
3-2-12
3-2-13
3-2-14-1
/3-2-14-2
3-2-15
NOTE1
NOTE2a,b
NOTE3
-
NOTE5a,b,c,d,e,f
-
NOTE7
NOTE8
NOTE9
NOTE10a,b
NOTE11a,b
NOTE12
NOTE13
NOTE14a,b
NOTE15a,b
NOTE16a,b
NOTE17
NOTE18
B.COVER ASSY
WINDOW(IR)
TOP COVER ASSY
HDD COVER ASSY
HDD
HDD CASE
REAR COVER ASSY
ZOOM UNIT
REAR BOARD ASSY
UPPER ASSY
FRONT ASSY
MIC
MAIN BOARD ASSY
OP BLOCK ASSY
ORNAMENT(TOP)
OPE BOARD ASSY
SPEAKER
MONITOR ASSY
3(S1),2(L1a), 3(L1b)
GRIP BELT,
S2,2(L2a),3(L2b),L2c
3(S3),JACK COVER(AV),
S3,3(L3a),3(L3b),3(L3c)
2(S4), L4a,b
CN5
5(S6),L6a,b
CN7a,b,3(S7),L7a,3(L7b)
2(S8), L8
L9a,2(L9b)
CN10, 2(S10), L10a,b
CN11,S11, L11a,b
S12, L12a, L12b, PLATE(MIC)
CN13a,b, 2(S13)
3(S14)
2(S15), L15a, 3(L15b)
CN16a,b, S16, 2(L16a),
2(L16b), 3(S16)
S17, L17a,b, 2(L17c), BKT(SPK)
S18a, L18a, 2(S18b), 2(L18b)
STEP
No.
PART NAME
Fig.
No.
POINT
NOTE
