(No.XC063)
VPT
Printed in Japan
SECTION 4
ADJUSTMENT
4.1
Adjustment of volume
(1) When replacing the "Lch board" or "Rch board", first, check if VR1 is in the "Medium" position as shown in the figure below.
(2) If VR1 is not in the "Medium" position, adjust it to "Medium".
SECTION 5
TROUBLESHOOTING
5.1
Assembly precautions of power switch knob
When replacing the power switch knob, place the nonwoven fabric provided with the power switch knob over the slide switch
on the Rch board as shown in the picture, and then attach the housing.
Rch board and Lch board
VR1
Medium
Minimum
Maximum
Rch board
Nonwoven fabric
(On the slide switch)
Victor company of Japan, Limited
ACCESSORIES CATEGORY 1644, Shimotsuruma, Yamato, Kanagawa 242-8514, Japan
