1-1
SECTION 1
DISASSEMBLY
1.1 HOW TO REMOVE THE MAJOR PARTS
1.1.1 Introduction
This set is a double-deck video recorder integrating a HDD
(Hard Disk Drive) and a VHS deck. Its internal structure is di-
vided into three sections that include the power supply, VHS
and HDD sections. Therefore, the removal of major parts will
also be described under three separate sections as listed be-
low.
1. COMMON section
2. VHS section
3. HDD section
1.2 HOW TO READ THE DISASSEMBLY AND ASSEMBLY
3. HDD section
1. COMMON section
2. VHS section
< TOP VIEW >
(1) Order of steps in Procedure
When reassembling, perform the step(s) in the reverse order.
These numbers are also used as the identification (location) No.
of parts Figures.
(2) Part name to be removed or installed.
(3) Fig. No. showing procedure or part location.
(4) Identification of part to be removed, unhooked, unlocked,
released, unplugged, unclamped or unsoldered.
P= Spring, W= Washer, S= Screw, L= Locking tab, SD= Solder,
CN**(WR**)= Remove the wire (WR**) from the connector
(CN**).
Note:
• The bracketed ( ) WR of the connector symbol are as-
signed nos. in priority order and do not correspond to
those on the spare parts list.
(5) Adjustment information for installation
Fig. 1-1-1
§
§
§
§
§
(1)
(2)
(3)
(4)
(5)
Step/
Loc No.
Fig. No.
Point
Note
Part name
Top cover, Bracket
COM1
4(S1), 3(S2), 2(L1), (L2)
2(S3)
1
—
Front panel
assembly
COM2 8(L3),
CN7507(WR1),
CN3011(WR2)
<Note
1,2,3,4>
2
1.3 DISCONNECTION OF CONNECTORS (WIRES)
CONNECTOR
FPC
CONNECTOR
FPC
Fig. 1-3-1
Fig. 1-3-2
Fig. 1-3-3
Fig. 1-3-4
CONNECTOR
FPC
Fig. 1-3-5
CONNECTOR
FPC
CONNECTOR
FPC
1.4 SCREWS USED CABINET COMPONENTS AND
BOARD ASSEMBLIES
Table 1-4-1 below shows the symbols, shapes, colors and
part numbers of screw that are used in the cabinet compo-
nents and board assemblies and are appearing in the disas-
sembling/reassembling diagrams in this manual.
When screwing them again in reassembling, be sure to use
them correctly referring to the following table.
Notes:
• Screw that are asterisked (marked with*) in the shape col-
umn are fixed with screw lock agent. If such the screw is
once removed, never use it again.
• The Screw symbols are assigned nos. in priority order and
do not correspond to those on the spare parts list.
SYMBOL
PARTS NO.
COLOR
S1
QYTDST3006R
SILVER BLACK
S4
QYTDSF2606Z
GOLD
S5
QYTDST3006Z
GOLD
S2
QYTDST3006M
BLACK
S6
QYTDSF3008M
BLACK
S3
QYTDSF3010Z
GOLD
S7
QYTDST2610Z
GOLD
S10
LP40738-001A
GOLD
S8
PQ40413
BLACK
S9
LP40700-001A
BLACK
Table 1-4-1
