25
MAKE CORRECTIONS
6
To change any of the settings, press OK or SEARCH
TY
until the item you want to change begins
blinking. Then set as in step 5.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
●
Press just once to access the Auto Timer screen
(
Z
pg. 27).
ENGAGE TIMER MODE
8
Press TIMER. The VCR's TIMER indicator lights and the
VCR turns off automatically.
NOTES:
●
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the VCR’s memory
backup keeps your selections for approximately 3 minutes.
●
If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
●
If you enter a start time that has already passed, "ERROR"
appears on the screen and blinks.
●
Programs that start after midnight must have the next day’s date.
●
After timer recording is completed, the VCR’s power goes off
automatically.
●
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
●
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
●
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
EXAMPLE
If you program the VCR to timer
record a show on December 24
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the
screen will look like this:
PROGRAM 1
DATE
12/24 WED
START
12:00 PM
STOP
1:00 PM
CHANNEL
40 SP
PRESS NUMBER KEY (O–9)
OR (
5
,
∞
), THEN (OK)
PRESS (MENU) TO END
q
2
3
6
5
/
8
3
¶
7
8
1
¡
1
2
3
4
5
6
7
8
0
9
MENU
OK
CH
TIMER
MENU
CH
OK
SEARCH
TIMER indicator
