Page 10
December 7, 2000 2:19 pm
VCR Plus+
®
Timer Programing
The PlusCode programing numbers are the numbers next to the
program in most TV listing.
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press
PROG.
on the Remote to access
the PlusCode No. screen.
B
Press the appropriate
Number keys
to input the PlusCode
number, then press
OK
. Check to make sure the setting is
accurate on the Program screen.
●
If the Guide Channel Set screen
appears after pressing
OK
, press the
Number keys
,
CH+/–
or
rt
to
input the number of the channel on
which the broadcast for the PlusCode
number is received on the VCR, then
press
OK
.
●
To set the tape speed, press
SP/EP
.
●
To change the stop time, press
STOP+/–
.
●
To timer-record daily (Monday–Friday) or weekly serials,
press
DAILY
(
M-F
) or
WEEKLY
. Pressing the button again
makes the “DAILY” or “WEEKLY” display disappear.
●
If you made a mistake, press
CANCEL
to access the
PlusCode No. screen again.
●
If an incorrect PlusCode number or the one for a broadcast
already finished has been inputted, “ERROR” is displayed for
about 5 seconds, then the PlusCode No. screen reappears.
C
Press
OK
or
PROG.
.
D
Press
TIMER
. The VCR turns off automatically and “
#
” is
displayed on the display panel.
Express Timer Programing
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press
PROG.
on the Remote to access the PlusCode No.
screen.
B
Press
START+/–
once to access
Program screen. Press
START+/–
,
STOP+/–
,
DATE+/–
or
CH+/–
repeatedly to enter the start time, stop
time, date or channel.
●
Press and hold
START+/–
or
STOP+/–
to increase the time in
30-minute intervals.
●
To set the tape speed, press
SP/EP
.
●
To timer-record daily (Monday–Friday) or weekly serials,
press
DAILY
(
M-F
) or
WEEKLY
. Pressing the button again
makes the “DAILY” or “WEEKLY” display disappear.
C
Press
OK
or
PROG.
.
D
Press
TIMER
. The VCR turns off automatically and “
#
” is
displayed on the display panel.
PLUSCODE NO.
PRESS NUMBER KEY (0–9)
PRESS (+/–) TO SET
EXPRESS PROGRAMMING
PRESS (PROG.) TO END
PROGRAM 1
(PLUSCODE NO. 12345678)
START
STOP
8:00PM
10:00PM
DATE
CH
12/24/00
12 SP
SUN
PRESS (8=DAILY, 9=WEEKLY
STOP+/– = STOP TIME, SP/EP)
PRESS (OK) TO END
PRESS NUMBER KEY (0–9)
THEN (OK)
PRESS (PROG.) TO END
1 2 3 4 5 6 7 8
PLUSCODE NO.
GUIDE CHANNEL SET
GUIDE CH : 12
VCR CH
: – – –
PRESS NUMBER KEY (0–9)
OR ( , ), THEN (OK)
PRESS (PROG.) TO END
PROGRAM 1
START
STOP
– –:– –AM
– –:– –AM
DATE
CH
– –/– –/– –
– – – SP
PRESS (+/
–
, SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
– Timer Recording –
HR-FS1U-EN.fm Page 10 Thursday, December 7, 2000 2:19 PM
