6
EN
1
2
3
4
0
6
7
8
5
9
1
4
3
2
INITIAL SETTINGS (cont.)
Auto Set Up
Auto Channel Set
Before starting, make sure of the following:
●
The TV aerial cable should be connected to the recorder.
●
The recorder's mains power cord should be connected to
a mains outlet.
Z
pg. 3
●
The "Video Channel Set" procedure should be done first
and the TV should be set to its AV mode (with AV
connection
Z
pg. 5) or video channel (with RF
connection
Z
pg. 4).
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear
when the
button is first pressed to power on the recorder
after you plug the mains power cord into a mains outlet.
IMPORTANT
●
Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
●
If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Language
Select, Clock Set or Channel Set procedures, but if
adjustments become necessary they can be performed as
follows:
– To change the selected language
Z
pg. 9
– To reset or adjust the time
Z
pg. 9
– To add/delete channels manually
Z
pg. 27
– To reset the tuner after moving to a different location
Z
pg. 26
PERFORM AUTO SET UP
1
Press
.
●
The Language Select screen appears.
SELECT LANGUAGE
2
Press
PUSH JOG
%fi
to place the pointer next to your
desired language (English or Russian), then press
OK
or
PUSH JOG
.
●
The Clock Set screen appears.
SET TIME
3
Press
PUSH JOG
%fi
to
set the time, then press
OK
or
PUSH JOG
.
●
Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
4
Press
PUSH JOG
%fi
to set the date, then press
OK
or
PUSH JOG
.
●
Press and hold either button to change the date by 15
days.
SET YEAR
5
Press
PUSH JOG
%fi
to set the year, then press
MENU
.
CLOCK SET
TIME
DATE
YEAR
0:00
01.01
98
[
5
/
∞
]
=
[MENU] : EXIT
fi
fi
fi
OK
PUSH JOG
MENU
