background image

Page 1

March 27, 2001 2:23 pm

VIDEO CASSETTE RECORDER

HR-J4008UM

INSTRUCTIONS

LPT0533-001A

Printed in Malaysia

COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.

0401 IYV

f

ID

f

PJ

Dear Customer,

Thank you for purchasing the JVC VHS video cassette recorder. 
Before use, please read the safety information and precautions to 
ensure safe use of your new VCR.

CAUTIONS

WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Cassettes marked “VHS” (or “S-VHS”) can be used with this 
video cassette recorder. However, S-VHS recording is not 
possible with this model.

This model is equipped with SQPB (S-VHS QUASI PLAYBACK) 
that makes it possible to play back S-VHS recordings with 
regular VHS resolution.

HQ VHS is compatible with existing VHS equipment.

The POWER 

1

 button does not completely shut off mains 

power from the unit, but switches operating current on and off. 

`

” shows electrical power standby and “ 

!

 ” shows ON.

This unit is produced to comply with Standard IEC 60065.

POWER SYSTEM:

This set operates on voltage of AC 110 – 220V

d

, 50/60 Hz 

with automatic switching.

Use the conversion plug (provided) depending on the type of 
your AC WALL outlet.

The rating plate and safety caution are on the rear of the unit.

IMPORTANT:

It may be unlawful to record or play back copyrighted material 
without the consent of the copyright owner.

CAUTION

When you are not using the VCR for a long period of time, it 
is recommended that you disconnect the power cord from the 
AC outlet.

Dangerous voltage inside. Refer internal servicing to qualified 
service personnel. To prevent electric shock or fire hazard, 
remove the power cord from the AC outlet prior to 
connecting or disconnecting any signal lead or aerial.

Changes or modifications not approved by JVC could void 
user’s authority to operate the equipment.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical 
burn hazard if mistreated. Do not recharge, disassemble, heat 
above 100°C or incinerate.
Replace battery with Panasonic (Matsushita Electric), Sanyo, 
Sony or Maxell CR2025. Danger of explosion or Risk of fire if 
the battery is incorrectly replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

HR-J4008UM-EN.fm  Page 1  Tuesday, March 27, 2001  2:23 PM

Summary of Contents for HR-J4008UM

















Reviews: