EN
5
SELECT AREA
3
Press
OK
. The Channel Preset Order display appears on
the front display panel and/or on the screen.
If you are referring to the front display panel
Press
%fi
to select your area code.
For SUISSE
For BELGIUM
DEUTSCHSPR.RAUM : 01
REGION FRANÇAISE : 01
REGION FRANÇAISE : 02
NEDERLANDS
: 02
REGIONE ITALIANA : 03
DEUTSCHSPR.RAUM : 03
If you are referring to the on-screen display
Press
%fi
to place the pointer next to your area's name.
●
The stations broadcasting in the language that is used
in your area will be stored in the lower channel
position numbers.
SELECT O.S.D. LANGUAGE
4
Press
OK
. The On-screen Display Language Set display
appears on the front display panel and/or on the screen.
If you are referring to the front display panel
Press
%fi
to select your language code.
FRANÇAIS: 03 DEUTSCH: 02 ENGLISH: 01
If you are referring to
the on-screen display
Press
%fi
to place the
pointer next to the
language of your choice.
(Ex.) DEUTSCH is selected for DEUTSCHLAND
International telephone
country code
Language code
NOTES:
●
If you are using the on-
screen display, the AUTO
SET screen will appear after
pressing
OK
in step
5
. As
Auto Set Up progresses, the
" " mark on the screen
moves from left to right.
●
If there is a power cut, or if
you press
or
MENU
while Auto Set Up is in
progress, Auto Set Up will
be interrupted; be sure to
turn off the recorder power once and try again from step
1
.
AUTO SET
PLEASE WAIT
[MENU] : EXIT
0
+
+
+
Beginning
End
(Ex.) DEUTSCHSPR.RAUM is selected for SUISSE
For SUISSE
For BELGIUM
CH PRESET ORDER
REGIONE ITALIANA
REGION FRANÇAISE
DEUTSCHSPR. RAUM
[
5∞
]
=
[MENU] : EXIT
CH PRESET ORDER
DEUTSCHSPR. RAUM
NEDERLANDS
REGION FRANÇAISE
[
5∞
]
=
[MENU] : EXIT
(Ex.) DEUTSCH is selected for SUISSE
International telephone
country code
Language code
O.S.D. LANGUAGE
FRANÇAIS
DEUTSCH
ENGLISH
[
5∞
]
=
[MENU] : EXIT
Area code
PERFORM AUTO SET UP
5
Press
OK
.
"Auto" appears on the display panel and blinks; do
NOT press any button on the recorder or remote
control until the display panel shows the current time
or "(PR) 1" or "– –:– –". (Refer to box on page 6.)
●
Auto channel set function takes place first; it assigns
automatically all receivable stations in your area.
●
Auto clock set function sets the clock automatically
by reading the clock setting data from a station
transmitting a PDC signal while auto channel set is
being performed.
●
During auto channel set, the recorder recognizes each
station name of the detected stations and stores them
in the recorder's memory, then automatically sets
S
HOW
V
IEW
assigned Guide Program number for those
stations according to the broadcast area.
NOTE:
In the area where no TV station transmits a PDC signal,
the recorder can perform neither auto clock set nor
auto Guide Program number set.
CONTINUED ON NEXT PAGE.
Summary of Contents for HR-J458EE
Page 51: ...EN 51 MEMO ...
