EN
7
If you performed Auto Channel Set (
Z
pg. 5), the recorder’s
built-in clock is also set automatically. The Auto and Manual
clock setting procedures are necessary when . . .
– a power outage of more than 60 minutes occurs.
– the tuner has been set manually.
– the user desires to set the clock slightly ahead of the actual
time.
– the clock was not set even after Auto Tuner Set was
performed.
Whether you perform Auto or Manual clock setting, you can
use the convenient Just Clock function.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from
a PDC signal.
The Just Clock option appears in the Clock Set and Auto Clock
screens, and can be set “ON” or “OFF” (the default setting is
“ON”). Press OK until the Just Clock setting begins blinking,
then press PUSH JOG
%fi
to change the setting.
IMPORTANT: If you turn off Just Clock off, the accuracy of your
recorder’s built-in clock may be reduced, which could
adversely effect timer recording.
Both Auto and Manual clock setting procedures begin from step 3.
Clock Set
1
2
4
5
3
6
8
0
7
9
1
3
2
6
q
OK
TV/VIDEO
Turn on the TV and select the VIDEO channel (or AV mode).
OPERATE
CLOCK
OPERATE
TURN THE RECORDER ON
1
Press OPERATE.
ACCESS CLOCK SET SCREEN
2
Press CLOCK on the
remote control. The Clock
Set screen appears.
Preparation
CLOCK SET
TIME
DATE
YEAR
0: 00
01 . 01
00
JUST CLOCK: ON
TV PR. 1
[ ]: AUTO CLOCK
[
5∞
]
=
[CLOCK] : EXIT
5
CONTINUED ON NEXT PAGE.
PUSH JOG
