1-8
-0
Not established
-1
EJECT
EJECT position
-2
EJECT-EJECT1
Intermodal position
-3
EJECT1
EJECT1 position
-4
EJECT1-EJECT2
Intermodal position
-5
EJECT2
EJECT2 position
-6
EJECT2-ULSTOP
Intermodal position
-7
ULSTOP
ULSTOP position
-8
ULSTOP-UPPER
Intermodal position
-9
UPPER
Loading (unloading) tape
-A
UPPER-ONSTOP
Intermodal position
-B
ONSTOP
PLAY position
-C
PLAY-FWD/SS
Intermodal position
-D
FWD/SS
FWD (FWD Still/Slow) position
-E
FWD/SS-REV
Intermodal position
-F
REV
REV (REV Still/Slow) position
-0
REV-OFFSTOP
Intermodal position
-1
OFFSTOP
Pinch roller OFF position
-2
OFFSTOP-FFREWB Intermodal position
-3
FFREWB
FF/REW Brake position
-4
FFREWB-FFREW
Intermodal position
-5
FFREW
FF/REW position
3– : Mechanism sensor information
[Common table of MN* and HD*]
* 6 : Cassette tape winding position
The cassette tape winding position at the moment of EMG is dis-
played by dividing the entire tape (from the beginning to the end) in
21 sections using a hex number from “00” to “14”.
“00”
: End of winding
“14”
: Beginning of winding
“FF”
: Tape position not identified
–4 : Mechanism mode position
[Common table of MN* and HD*]
Note:
•
The values of cassette tape type <2> in the above table are
typical values with representative cassette tapes.
* 7 : Cassette tape type <2> (Winding area)
Notes:
•
Cassette tape type
<1> is identified a few times during mode tran-
sition and the identification count is variable depending on the cas-
sette tape type. If an EMG occurs in the middle of identification, the
cassette tape type may not be able to be identified.
•
If other value than those listed in the above table is displayed,
the cassette tape type is not identified.
Display
Cassette tape type <1>
00
Cassette type not identified
16
Large reel/small reel (T-0 to T-15/T-130 to T-210) not classified
82
Small reel, thick tape (T-120) identified/thin tape (T-140) identified
84
Large reel (T-0 to T-60) identified
92
Small reel, thick tape (T-130) identified/thin tape (T-160 to T-210) identified
93
Small reel, thick tape/C cassette (T-0 to T-100/C cassette) not classified
C3
Small reel, thick tape/C cassette (T-0 to T-100/C cassette) being classified
D3
Small reel, thick tape/C cassette (T-0 to T-100/C cassette) being classified
E1
C cassette, thick tape (TC-10 to TC-20) identified
E2
Small reel, thick tape (T-0 to T-100) identified
E9
C cassette, thin tape (TC-30 to TC-40) identified
F1
C cassette, thick tape/thin tape (TC-10 to TC-40) not classified
* 5 : Cassette tape type <1>
Note:
•
EMG detail information <2> is the reference information
stored using the remaining tape detection function of the cas-
sette tape. As a result, it may not identify cassette correctly
when a special cassette tape is used or when the tape has
variable thickness.
1.3.6
EMG detail information <2>
The type of the cassette tape and the cassette tape winding posi-
tion can be confirmed based on the figure in EMG detail informa-
tion <2> .
[FDP/OSD display]
* 5 : * 6 : * 7
* 5 : Type of the cassette tape in use <1>
* 6 : Winding position of the cassette tape in use
* 7 : Type of the cassette tape in use <2> (Winding area)
0-
Tab broken
ON
ON
ON
ON
ON
ON
1-
Tab broken
ON
2-
Tab broken
ON
3-
Tab broken
ON
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
OFF
4-
Tab present
ON
5-
Tab present
6-
Tab present
OFF
ON
7-
Tab present
OFF
OFF
OFF
OFF
OFF
8-
Tab broken
ON
ON
ON
9-
Tab broken
ON
ON
ON
A-
Tab broken
B-
Tab broken
OFF
OFF
C-
Tab present
ON
ON
D-
Tab present
E-
Tab present
OFF
F-
Tab present
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Mechanism sensor information
Display
REC safety SW
Start sensor
End sensor
Mechansim
position sensor
Display
Cassette tape type <2>
(Reference) Word data
(Beginning) (End)
00
04 - 08
05 - 06
05 - 0C
06 - 0C
06 - 0C
07 - 08
09 - 0B
0C - 0D
0D - 0F
0E - 10
10 - 12
10 - 13
11 - 14
12 - 14
13 - 14
13 - 14
13 - 14
13 - 14
15 - 16
16 - 17
17 - 18
19 - 1B
Cassette type not identified
C cassette, thick tape
TC-10
Small reel, thick tape
T-20
C cassette, thick tape
TC-20P
C cassette, thin tape
TC-40
C cassette, thin tape
TC-30
Small reel, thick tape
T-40
Small reel, thick tape
T-60
Small reel, thick tape
T-80(DF-160)
Small reel, thick tape
T-90(DF-180)
Small reel, thick tape
T-100
Small reel, thin tape
T-140
Small reel, thick tape
T-120(DF-240)
Small reel, thick tape
T-130
Small reel, thin tape
T-160
Small reel, thin tape
T-210(DF-420)
Small reel, thin tape
T-180(DF-360)
Small reel, thin tape
T-168
Small reel, thick tape
DF-300
Large reel
T-20
Large reel
T-30
Large reel
T-40
Large reel
T-60
(0497 - 0506)
(0732 - 0858)
(05A9 - 0661)
(0599 - 05FF) (0AA1 - 0C07)
(0623 - 063D) (0C41 - 0CC3)
(0611 - 0638) (0C0C - 0CB2)
(07CC - 08E5)
(09FD - 0B78)
(0C20 - 0DFC)
(0D31 - 0F3E)
(0E43 - 107F)
(10E1 - 120C)
(1073 - 1313)
(1185 - 1429)
(12D3 - 141F)
(1373 - 14C3)
(1357 - 14C0)
(1395 - 14EE)
(13A8 - 14CE)
(1536 - 1618)
(1647 - 175A)
(1759 - 189C)
(1989 - 1B2F)
Tab broken = 0
Sensor ON = 0
Sensor ON = 0
Tab present = 1
sensor OFF = 1
Sensor OFF = 1
1.3.7
EMG detail information <3>
Three deck operation modes preceding the deck operation
mode in which the EMG occurs may be confirmed based on
the figures in the EMG information detail <3>. For the contents
of the displayed information, see the table "Deck operation
mode" in section "1.3.5 EMG detail information <1>".
Mechanism
sensor
information
Dis-
play
Deck operation mode
Even number
(0, 2, 4, 6, 8,
A, C, E)
Odd number
(1, 3, 5, 7, 9,
B, D, F)
www.freeservicemanuals.info
25/8/2013
World of free manuals
