background image

— 2 —

Page 2

November 8, 2002 4:09 pm

Failure to heed the following precautions may result in damage to 
the VCR, Remote or video cassette.

1. DO NOT place the VCR . . .

...in an environment prone to extreme temperatures or 
humidity.
...in direct sunlight.
...in a dusty environment.
...in an environment where strong magnetic fields are 
generated.
...on a surface that is unstable or subject to vibration.

2. DO NOT block the VCR’s ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the 

VCR or on the Remote.

5. AVOID violent shocks to the VCR during transport.

Cassettes marked “S-VHS” and “VHS” can be used with this 
video cassette recorder. However, S-VHS recordings are 
possible only with cassettes marked “S-VHS”. 
By using S-VHS ET it is possible to record and play back with 
S-VHS picture quality on VHS cassettes with this VCR.

As an E

NERGY

 S

TAR

®

 Partner, JVC has determined that this product 

or product model meets the E

NERGY

 S

TAR

®

 guidelines for energy 

efficiency.

IMPORTANT PRODUCT SAFETY 

INSTRUCTIONS

Electrical energy can perform many useful functions. But improper 
use can result in potential electrical shock or fire hazards. This 
product has been engineered and manufactured to assure your 
personal safety. In order not to defeat the built-in safeguards, 
observe the following basic rules for its installation, use and 
servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your 
product and its operating instructions. For your safety, please read 
all the safety and operating instructions before you operate this 
product and keep this booklet for future reference.

INSTALLATION

1. Grounding or Polarization

(A) Your product may be equipped with a polarized alternating-

current line plug (a plug having one blade wider than the 
other). This plug will fit into the power outlet only one way. 
This is a safety feature.
If you are unable to insert the plug fully into the outlet, try 
reversing the plug. If the plug should still fail to fit, contact your 
electrician to replace your obsolete outlet. Do not defeat the 
safety purpose of the polarized plug.

(B) Your product may be equipped with a 3-wire grounding-type 

plug, a plug having a third (grounding) pin. This plug will only 
fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your 
electrician to replace your obsolete outlet. Do not defeat the 
safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source 
indicated on the marking label. If you are not sure of the type of 
power supply to your home, consult your product dealer or local 
power company. If your product is intended to operate from 
battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral 
convenience receptacles as this can result in a risk of fire or 
electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to 
be walked on or pinched by items placed upon or against them, 
paying particular attention to cords at plugs, convenience 
receptacles, and the point where they exit from the product.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect it from 
overheating, these openings must not be blocked or covered.

Do not block the openings by placing the product on a bed, 
sofa, rug or other similar surface.

Do not place the product in a built-in installation such as a 
bookcase or rack unless proper ventilation is provided or the 
manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as 
recommended by the manufacturer.

CAUTION:

Changes or modifications not approved by JVC could void 
user’s authority to operate the equipment.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical 
burn hazard if mistreated. Do not recharge, disassemble, heat 
above 100°C or incinerate.
Replace battery with CR2032. Panasonic (Matsushita Electric) 
or Maxell is recommended. 
Danger of explosion or Risk of fire if the battery is incorrectly 
replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

Declaration of Conformity

Model Number:

HR-S2912U

Trade Name:

JVC

Responsible Party:

JVC Americas Corp.

Address:

1700 Valley Road Wayne, N.J. 07470

Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.

For Customer Use:

Enter below the Model No. and Serial No. which are located 
on the rear of cabinet. Retain this information for future 
reference.
Model No.

Serial No.

HR-S2912U-EN.fm Page 2 Friday, November 8, 2002 4:09 PM

Summary of Contents for HR-S2912U

















Reviews: