JVC HR-S3600M Instructions Manual Download

Page: 18 / 72

INITIAL SETTINGS (cont.)

ACCESS CABLE BOX

BRAND SET SCREEN

Press

OK.

ENTER CABLE BOX BRAND

Press the appropriate

NUMBER

keys to enter the

Cable Box Code from the
CABLE BOX BRAND LIST
shown below, then press

●

If the cable box’s
channel changes to 9,
setting is complete. Press

and "CABLE BOX

CONTROL IS ON" appears on the screen for about 5
seconds, then it returns to the normal screen.

●

If the cable box's channel does not change to 9, press

5∞

SHUTTLE PLUS

%fi

to move the highlight

bar (arrow) to "NO", then press

. By entering

another code, repeat step

until the cable box’s

channel changes to 9.

●

If the channel does not change after going through all
the code numbers listed for your model of cable box,
then try all the other numbers between 1 and 25.

CABLE BOX BRAND LIST

BRAND

CODE

ARCHER

1, 5, 17

CABLETENNA

1, 17

CABLEVIEW

15, 16, 17, 21, 25

CITIZEN

15, 16, 17, 21, 25

CURTIS

2, 8

DIAMOND

1, 17

EASTERN

GC BRAND

15, 16, 17, 21, 25

GEMINI

GENERAL INSTRUMENTS

1, 4, 6, 11, 12, 15

HAMLIN

10, 18, 19, 23

JASCO

JERROLD

1, 4, 6, 11, 12, 15

NOVAVISION

2, 8

OAK

7, 20

PANASONIC

13, 14

PULSER

15, 16, 17, 21, 25

RCA

13, 14

REGAL

10, 18, 19, 23

REGENCY

REMBRANDT

1, 16, 17

SAMSUNG

5, 16, 24

SCIENTIFIC ATLANTA

2, 8

SIGMA

7, 20

SL MARX

5, 16, 17, 24, 25

SPRUCER

13, 14

STARGATE

5, 15, 16, 17, 21, 24, 25

TELEVIEW

5, 16, 24

TOCOM

1, 4, 16

UNIKA

1, 17

UNIVERSAL

16, 17, 25

VIDEOWAY

3, 9, 22

ZENITH

3, 9, 22

NOTES:

●

Although the supplied Controller is compatible with many
different cable box brands, it is possible that it will not work
with your cable box.

●

If your cable box doesn’t respond to any code between 1 and
25, you can’t use the Controller to change cable box
channels. In this case, make sure to leave the cable box
turned on and tuned to the proper channel before the
scheduled start of timer recording.
Please contact your cable company about the possibility of
exchanging your current cable box with one that is compatible
with your VCR.

●

The VCR can only change the cable box channel through the
Controller during timer recording.

●

If your cable box is one that can’t be operated with a remote
control (because it has no remote sensor), you can’t use the
Controller to change its channels. Make sure to leave the
cable box turned on and tuned to the proper channel before
the scheduled start of timer recording.

●

If the VCR's memory backup expires because of a power
failure, set the cable box output channel and brand again.

●

For customers in U.S.A.:

If you are unable to set the

Controller, please contact JVC toll free at 1-800-252-5722.

When the VCR's clock has not been set (with AUTO
CLOCK set to ON), if you press

in step

, "CABLE

BOX USERS SET CLOCK MANUALLY" will be displayed on
the screen for about 5 seconds, then the Clock Set screen
will appear; perform the manual clock setting procedure
on page 13. If you press

MENU

after the clock has been

set, the Cable Box Brand Set screen appears.

INFORMATION

CABLE BOX BRAND SET

PRESS NUMBER KEY (0–9)

THEN (OK) TO TEST

PRESS (MENU) TO END

JOG

SHATTLE

MENU