advanced features
36
[
1
]
a
k
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-2 INPUT
VIDEO
L-2 INPUT Setting
The
L-2 IN/DECODER
connector accepts either a composite signal (regular video
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
L-2 INPUT
to the appropriate mode depending on the output
signals of the connected unit.
get to the output/input set screen
Press
m
. Move the highlight bar to
OUTPUT/INPUT SET
using the
A
and
B
buttons and press
OK
3
/
(or
E
).
select mode
Move the highlight bar to
L-2 INPUT
using the
A
and
B
buttons. Press
OK
3
/
(or
E
) to select the desired mode:
FOR L-2 INPUT
•
VIDEO
: If a connected device’s output is
compatible only with regular
video signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s output is
compatible with Y/C signals, set to
S-VIDEO
. This setting will let you
take advantage of higher-quality
S-VHS pictures. (For connection,
be sure to use a 21-pin SCART
cable that is compatible with the
Y/C signal.)
return to normal screen
Press
m
.
HR-S5955/5956EK-EN/p27-39
5/28/02, 11:51 AM
36
