February 8, 2003 4:06 pm
Page 14
— 14 —
Master Page: Right
Deleting a channel
A
Access Confirmation screen
Perform step
1
1
1
1
of “Manual Channel Set” (
墌
13).
B
Select position
Press
rt
w
e
to until the channel you want to delete begins
blinking.
C
Delete channel
Press
&
. The channel directly beneath the cancelled one moves
up one line.
●
Repeat steps
2
2
2
2
–
3
3
3
3
as necessary.
D
Return to normal screen
Press
MENU
.
Changing station channel positions
A
Access Confirmation screen
Perform step
1
1
1
1
of “Manual Channel Set” (
墌
13).
B
Select position
Press
rt
w
e
until the station you want to move begins blinking,
then press
OK
. The channel number (CH) and the station name
(ID) begin blinking.
C
Select new position
Press
rt
w
e
to move the station to the new position, then press
OK
.
Example
: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down one
space.
●
Repeat steps
2
2
2
2
–
3
3
3
3
as necessary.
D
Return to normal screen
Press
MENU
.
When receiving a scrambled broadcast
NOTE:
When you select a country in Central or Eastern Europe for
country setting, you cannot use decoder with this recorder.
A
Select decoder mode
Set “L-2 SELECT” to “DECODER”. (
墌
10)
B
Access Confirmation screen
Perform step
1
1
1
1
of “Manual Channel Set”.
C
Select position
Press
rt
w
e
to select the channel broadcasting scrambled
programmes, then press
OK
twice.
D
Change decoder setting
Press
e
until “OFF” begins blinking, and set it to “ON” by
pressing
rt
. Then press
OK
.
●
Repeat steps
3
3
3
3
–
4
4
4
4
as necessary.
E
Return to normal screen
Press
MENU
.
Changing station name
A
Access Confirmation screen
Perform step
1
1
1
1
of “Manual Channel Set” (
墌
13).
B
Select position
Press
rt
w
e
until the desired channel begins blinking, then
press
OK
twice. The Manual Channel Set screen appears.
C
Select station name
If the station name is registered in your
recorder,
Press
e
until the station name (ID) begins
blinking. Press
rt
until the desired
station name appears, then press
OK
.
Repeat steps
2
2
2
2
–
3
3
3
3
as necessary.
Otherwise,
Press
e
until the first letter of the station
name (ID) begins blinking. Press
rt
to
cycle through the characters, then press
e
. Enter the remaining characters the
same way (maximum of 4). After entering
all characters, press
OK
.
●
The characters available for the station
name (ID) are A-Z, 0-9, –, *, +, _ (space).
●
If you make a mistake, press
w
until the incorrect character
begins blinking. Then enter the correct character by pressing
rt
.
D
Return to normal screen
Press
MENU
.
Fine-tuning channels
A
Access Confirmation screen
Perform step
1
1
1
1
of “Manual Channel Set” (
墌
13).
B
Select position
Press
rt
w
e
until the channel you want to tune begins blinking,
then press
OK
twice. The Manual Channel Set screen appears.
C
Perform tuning
Press
e
until “+/–” begins blinking, then press
rt
until the
picture is its clearest. Then press
OK
.
●
Repeat steps
2
2
2
2
–
3
3
3
3
as necessary.
D
Return to normal screen
Press
MENU
.
HR-S5960.5961_001EN.fm Page 14 Saturday, February 8, 2003 4:07 PM