background image

February 14, 2003 1:23 pm

Page 2

— 2 —

Master Page: Right

Cassettes marked “S-VHS” and “VHS” can be used with this 
video cassette recorder. However, S-VHS recordings are 
possible only with cassettes marked “S-VHS”.
By using the S-VHS ET function, it is possible to record and play 
back with S-VHS picture quality on VHS cassettes with this 
recorder.

S

HOW

V

IEW

 is a registered trademark of Gemstar Development 

Corporation. The S

HOW

V

IEW

 system is manufactured under 

licence from Gemstar Development Corporation.

When the equipment is installed in a cabinet or a shelf, make sure 
that it has sufficient space on all sides to allow for ventilation 
(10 cm or more on both sides, on top and at the rear).

When discarding batteries, environmental problems must be 
considered and the local rules or laws governing the disposal of 
these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to 
the recorder, remote control or video cassette.

1. DO NOT place the recorder …

… in an environment prone to extreme temperatures or 

humidity.

… in direct sunlight.
… in a dusty environment.
… in an environment where strong magnetic fields are 

generated.

… on a surface that is unstable or subject to vibration.

2. DO NOT block the recorder’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a 
newspaper or cloth, etc., the heat may not be able to get out.)

3. DO NOT place heavy objects on the recorder or remote 

control.

4. DO NOT place anything which might spill on top of the 

recorder or remote control.
(If water or liquid is allowed to enter this equipment, fire or 
electric shock may be caused.)

5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with 

water. Also DO NOT place any containers filled with water or 
liquids (such as cosmetics or medicines, flower vases, potted 
plants, cups, etc.) on top of this unit.

7. DO NOT place any naked flame sources, such as lighted 

candles, on the apparatus.

8. AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move 
it from a cold place to a warm place, or under extremely humid 
conditions—just as water droplets form on the surface of a glass 
filled with cold liquid. Moisture condensation on the head drum 
will cause damage to the tape. In conditions where condensation 
may occur, keep the recorder’s power turned on for a few hours to 
let the moisture dry.

How to use the remote control

Before use, insert the lithium 
battery — CR2032 — 
correctly, with the plus(+) side 
up into the battery 
compartment. To open it, press 
the release tab and carefully, 
pull the compartment out.
The remote control can 
operate most of your recorder’s functions, as well as basic 
functions of JVC TVs.

Point the remote control towards the remote sensor on the target 
component. The maximum operating distance is about 8 m.

To operate a JVC TV, use any of the following buttons:

TV 

1

TV 

TV PR +/–

 or 

TV 

%

+/–

.

NOTE:

If the remote control does not work properly, remove its battery, 
wait for a few seconds, replace the battery and then try again.

Video heads cleaning

The heads get dirty in the following cases:

in an environment prone to extreme temperature or humidity

in a dusty environment

flaw, dirt or mold on video tapes

continuous usage for a long time

Use a dry cleaning cassette — TCL-2 — when:

Rough, poor picture appears while a tape is played back.

The picture is unclear or no picture appears.

“USE CLEANING CASSETTE” appears on the screen (only with 
“O.S.D.” set to “ON” (

12)).

Usable cassettes

Compact VHS camcorder recordings can 
be played on this recorder. Simply place 
the recorded cassette into a VHS Cassette 
Adapter and it can be used just like any 
full-sized VHS cassette.

This video recorder can record on regular VHS and Super VHS 
cassettes. While only VHS signals can be recorded on regular 
VHS cassettes*, both VHS and Super VHS signals can be 
recorded and played back using Super VHS cassettes.

* By using the S-VHS ET function, it is possible to record and play back 

with S-VHS picture quality on VHS cassettes with this recorder.

ATTENTION:

TO MOBILE PHONE USER:

Using a mobile phone in the vicinity of the recorder may cause 
picture vibration on the TV screen or change the screen to a 
blue back display.

ON PLACING THE RECORDER:

Some TVs or other appliances generate strong magnetic fields. 
DO NOT place such appliance on top of the recorder as it may 
cause picture disturbance.

Release

tab

HR-S5960.5961_001EN.fm Page 2 Friday, February 14, 2003 1:24 PM

Summary of Contents for HR-S5960E

















Reviews: