February 8, 2003 4:54 pm
Page 8
— 8 —
Master Page: Right
To record stereo and bilingual programmes (A2)
●
Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed
L and R channel sound).
●
Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack is recorded on
the normal audio track.
To record NICAM stereo and bilingual programmes
The NICAM audio programme is recorded on the Hi-Fi audio
track, and the standard audio programme on the normal audio
track.
NOTES:
●
If the quality of stereo sound being received is poor, the
broadcast may be received in monaural with better quality.
●
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Selecting Soundtrack” (
墌
6).
S-VHS (Super VHS), S-VHS ET or VHS Recording
Mode
This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS.
●
To record in S-VHS:
Set “S-VHS” to “ON” (
墌
12). Then, insert a cassette marked
“S-VHS”. The S-VHS indicator lights up on the display panel.
The S-VHS recording mode is selected.
●
To record in S-VHS ET on a VHS cassette:
Set “S-VHS ET” to “ON” (
墌
11). Then, insert a cassette marked
“VHS”. The S-VHS indicator lights up on the display panel.
●
To record in VHS:
Insert a cassette marked “VHS”.
Set “S-VHS ET” to “OFF” (
墌
11).
●
To record in VHS on a S-VHS cassette:
Insert a cassette marked “S-VHS”. The S-VHS indicator lights up
on the display panel. Then, set “S-VHS” to “OFF” (
墌
12). The
S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights up on the display panel
regardless of the “S-VHS ET” (
墌
11) or “S-VHS MODE” (
墌
12)
setting.
Up to 8 timer recording programmes can be made.
Before starting:
●
Set the clock properly. (
墌
13)
●
Set “COLOUR SYSTEM” to the appropriate mode. (
墌
12)
●
Load a cassette with the record safety tab intact.
NOTES:
●
PDC recording is not possible in Central and Eastern Europe.
●
If all the 8 programmes have already been set, “PROGRAM
FULL” appears on the screen.
●
If the clock is not set, “CLOCK MUST BE SET” appears on the
screen.
●
If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
●
After timer recording is completed, the recorder turns off
automatically.
●
If the tape reaches its end during timer recordings, the recording
stops and “
#
”, “
䡬
” and “
$
” on the display panel blink. Press
#
to disengage timer, then press
0
on the recorder to eject
the cassette or press
1
then press
3
to rewind the tape.
●
You can programme the timer recording while a regular
recording is in progress; the menu screens will not be recorded.
S
HOW
V
IEW
®
Timer Programming
The S
HOW
V
IEW
numbers are the numbers next to the programme
in most TV listing.
A
Press
PROG
to access the Timer Programming Set screen.
B
Press
rt
to place the pointer next to
“S
HOW
V
IEW
“, then press
OK
or
e
.
The
S
HOW
V
IEW
NO. screen appears.
C
Press the appropriate
number keys
to
input the S
HOW
V
IEW
number, then press
OK
. The S
HOW
V
IEW
program screen
appears.
●
If the number you entered is invalid,
“ERROR” appears on the screen. Press
&
and input a valid S
HOW
V
IEW
number.
●
Make sure the channel position
number you wish to record is displayed; if “TV PROG” displays
“
– –
”, set the channel position number correctly. Press
PR
r
/
t
to input the channel position number on which your recorder
receives the station. Then press
OK
.
●
To set the tape speed, press
SP/LP
(
p
).
●
To set the VPS/PDC mode, press
VPS/PDC
(
number key “7”
).
●
To change the stop time, press
STOP /
(
number keys “2”
and/or “5”
).
●
To timer-record daily (Monday–Friday) or weekly serials, press
DAILY
(
number key “8”
) or
WEEKLY
(
number key “9”
). Pressing
the button again makes the “DAILY” or “WEEKLY” display
disappear.
●
To change the channel position number, press
PR
r
/
t
.
D
Press
OK
or
PROG
.
E
Press
#
. The recorder turns off automatically and “
#
” is
displayed on the display panel.
To timer-record a satellite broadcast using the S
HOW
V
IEW
system:
A
Set “L-2 SELECT” to “A/V” (
墌
10).
B
Perform steps
1
1
1
1
–
5
5
5
5
.
C
Set the satellite receiver to the appropriate channel before the
selected programme begins.
D
Leave the satellite receiver’s power on.
Timer Recording
HR-S5960.5961_001EN.fm Page 8 Saturday, February 8, 2003 4:54 PM
