45
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
Change Station Preset
Position
SELECT ITEM
1
Press
%fi
@ #
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press
%fi
@ #
to move the station to the new preset
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
●
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
SELECT ITEM
1
Press
%fi
@ #
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press .
●
The item directly beneath the cancelled one moves
up one line.
●
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Delete A Channel
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
SELECT CHANNEL TO FINE-TUNE
1
Press
%fi
@ #
until the channel you want to tune begins
blinking.
ACCESS MANUAL
CHANNEL SET SCREEN
2
Press OK twice. The Manual Channel Set screen
appears.
PERFORM TUNING
3
Press
#
until "+/–" begins blinking, then press
%fi
until
the picture is clearest. Then press OK.
●
The Confirmation screen appears.
●
Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION SCREEN
4
Press MENU.
Fine-Tuning Channels
Already Stored
PR
CH
ID
PR
CH
ID
01
26
BBC1
08
– – – –
02
23
ITV
09
– – – –
03
30
CH4
10
– – – –
04
33
BBC2
11
– – – –
05
37
CH5
12
– – – –
06
– – – – 13
– – – –
07
– – – – 14
– – – –
[
5∞
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
PR
CH
ID
PR
CH
ID
01
26
BBC1
08
– – – –
02
33
BBC2
09
– – – –
03
23
ITV
10
– – – –
04
30
CH4
11
– – – –
05
37
CH5
12
– – – –
06
– – – – 13
– – – –
07
– – – – 14
– – – –
[
5∞
] : MOVE
=
[MENU] : EXIT
5
5
5
5
ATTENTION
If channel positions are changed or deleted, the Guide
Program numbers that have been set are reset.
●
Example 1: If a channel is deleted, all the Guide Program
numbers are reset.
●
Example 2: If a channel is changed from position 4 to
position 2, the Guide Program numbers
above position 4 are reset.
●
Example 3: If a channel is changed from position 4 to
position 6, the Guide Program numbers
above position 6 are reset.
* In Examples 2 and 3, if the channel is moved to position
10 before OK is pressed, the Guide Program numbers
above position 10 are reset.
If an attempt is made at timer programming with VIDEO
Plus+ in this state, the “GUIDE PROG SET” screen
appears; set the Guide Program numbers on this screen.
Z
“ATTENTION – Regarding Guide Program Number
Set” on page 17.
Or perform “Guide Program Number Set” (
Z
pg. 49).
NOTE:
The characters available for the station name (ID) are A–Z, 0–9,
–,
*
, +, (space) (maximum of 4).
Summary of Contents for HR-S6600EK
Page 58: ...MEMO ...
Page 59: ...MEMO ...
