advanced features
51
[
1
]
a
k
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-1 INPUT
VIDEO
L-2 SELECT
A/V
L-2 INPUT
VIDEO
F
L-2 SELECT/INPUT Setting
The
A
V2 (L-2) IN/DECODER
connector accepts either a composite signal (regular
video signal) or a Y/C signal (a signal in which the luminance and chrominance
signals are separated). Set
L-2 SELECT
to the appropriate mode depending on the
type of unit connected to the rear panel
A
V2 (L-2) IN/DECODER
connector of this
VCR. Set
L-2 INPUT
to the appropriate mode depending on the output signals of
the connected unit.
get to the output/input set screen
Press
m
. Move the highlight bar to
OUTPUT/INPUT SET
using the
A
and
B
buttons and press
O
(or
E
).
select mode
Move the highlight bar to
L-2
SELECT
or
L-2 INPUT
using the
A
and
B
buttons. Press
O
(or
E
) to select the
desired mode:
FOR L-2 SELECT
•
A/V
: To use this VCR as the re-
corder with the player con-
nected to the
A
V2 (L-2) IN/
DECODER
connector, or to use
the satellite receiver connected
to the
A
V2 (L-2) IN/DECODER
connector.
•
DECODER
: To use a decoder connected to the
A
V2 (L-2) IN/DECODER
connector.
•
SAT
: To view a satellite programme with the TV set while the VCR is
turned off. (
pg. 48)
FOR L-2 INPUT
•
VIDEO
: If a connected device’s output is compatible only with regular video
signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s output is compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
return to normal screen
Press
m
.
NOTES:
• If you have a satellite receiver or a decoder connected to the
A
V2 (L-2) IN/
DECODER
connector, be sure to set
L-2 SELECT
back to appropriate mode after
editing.
• If you’re not connecting a satellite receiver or a decoder to the
A
V2 (L-2) IN/
DECODER
connector, leave
L-2 SELECT
set to
A/V
.
• The default setting is
A/V
; if the VCR’s memory backup has expired due to a
power cut or because the AC was removed from the VCR,
A/V
will be auto-
matically selected when the power is restored to the VCR. If you are using a
satellite receiver or a decoder, be sure to set
L-2 SELECT
back to appropriate
mode.
• When
L-2 SELECT
is set to
SAT
, ‘SAT’ appears on TV screen instead of ‘L-2’, or
on the display panel instead of ‘L2’.
• If
L-2 SELECT
is set to
DECODER
, it is impossible to set
L-2 INPUT
to
S-VIDEO
.
• If
L-1 OUTPUT
is set to
S-VIDEO
, it is impossible to set
L-2 SELECT
to
DECODER
.
