background image

advanced features

66

Clock Set

You should only need to perform this function if:

• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel

Set

• The VCR’s memory backup has expired
• You want to change the Just Clock setting

Setting the Clock

get to the initial set screen

  Press 

m

. Move the highlight bar to 

INITIAL SET

 using the

A

 and 

B

 buttons and press 

O

 (or 

E

).

get to the clock set screen

  Move the highlight bar to 

CLOCK SET

 using the 

A

 and

B

 buttons and press 

O

 (or 

E

).

set time and date

  When the 

CLOCK SET

 screen appears, the

time will be blinking. Use the 

A

 and 

B

 buttons to set the

correct time (

pressing and holding will advance the time in

30 minute increments

) and then press 

O

 (or 

E

). The date

will blink. Use the 

A

 and 

B

 buttons to set the correct

date (

pressing and holding will advance the date in 15 day incre-

ments

) and then press 

O

 (or 

E

). Set the correct year in the

same way and press 

O

.

set just clock

  Set as desired using the 

A

 and 

B

buttons then press 

O

 (or 

E

).

set preset for clock data source

  If you have set 

JUST CLOCK

 to 

ON

, you will need to

specify a preset (station) for 

JUST CLOCK

 to take its source data from. Use the 

A

 and 

B

buttons to select the preset and press 

O

 (or 

E

).

start clock oper ation

  Press 

m

.

Notes on Just Clock

Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (

including the adjustment for British Summer Time

). It will

do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting 

JUST CLOCK

 to 

ON

, you are

enabling the VCR to do this.
Just Clock is not effective in the following circumstances:

• when the VCR is powered on.
• when the VCR is in Timer or Auto Satellite Programme Recording modes.
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
• when 

L-2 SELECT

 is set to 

SAT

. (

 pg. 51)

[

1

a

 

k

[MENU]: EXIT

CLOCK SET

TIME

DATE

YEAR

0: 00

01 . 01

01

JUST CLOCK : ON
TV PR.

:

1

Summary of Contents for HR-S6855EK













































































Reviews: