advanced features
37
Editing
L-1 OUTPUT Setting
The
L-1 IN/OUT
connector delivers either a composite signal (regular video
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
L-1 OUTPUT
to the appropriate mode depending on the type of
unit connected to the rear panel
L-1 IN/OUT
connector of this VCR.
get to the output/input set screen
Press
m
. Move the highlight bar to
OUTPUT/INPUT SET
using the
A
and
B
buttons and press
OK
3
/
(or
E
).
select mode
Move the highlight bar to
L-1
OUTPUT
using the
A
and
B
buttons.
Press
OK
3
/
(or
E
) to select the desired mode:
FOR L-1 OUTPUT
•
VIDEO
: If a connected device’s input is
compatible only with regular
video signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s input is
compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
return to normal screen
Press
m
.
[
1
]
a
k
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-2 INPUT
VIDEO
F
HR-S6955EK-EN/p29-41
3/13/02, 05:07 PM
37
Summary of Contents for HR-S6955EK
Page 12: ...three step quick start 12 ...
Page 28: ...basic features 28 ...
