background image

September 27, 2004 12:12 pm

Page 2

— 2 —

Master Page: Right

Cassettes marked “S-VHS” and “VHS” can be used with this 
video cassette recorder. However, S-VHS recordings are 
possible only with cassettes marked “S-VHS”.
By using the S-VHS ET function, it is possible to record and play 
back with S-VHS picture quality on VHS cassettes with this 
recorder.

HQ VHS is compatible with existing VHS equipment.

G-

CODE

 is a trademark of Gemstar Development Corporation 

and is registered in the following countries and areas: Australia, 
China, Hong Kong, Japan, South Korea, New Zealand, and 
Taiwan. S

HOW

V

IEW

 is a trademark of Gemstar Development 

Corporation and is registered in the following countries: Austria, 
Belgium,Czech Republic, Denmark, Finland, France, Germany, 
Hungary, Iceland, Italy, Luxembourg, Netherlands, Norway, 
Poland, Portugal, Russia, Slovakia, South Africa, Spain, Sweden 
and Switzerland. The G-

CODE

/S

HOW

V

IEW

 system is 

manufactured under license from Gemstar Development 
Corporation. 
G-

CODE

 and S

HOW

V

IEW

 are different trademarks used to 

represent the same easy recording feature. However, for 
simplicity, only the term G-

CODE

 will be used in the instructions. 

If you use S

HOW

V

IEW

 system, follow the same steps listed for the 

G-

CODE

 system. 

When the equipment is installed in a cabinet or a shelf, make sure 
that it has sufficient space on all sides to allow for ventilation 
(10 cm or more on both sides, on top and at the rear).

When discarding batteries, environmental problems must be 
considered and the local rules or laws governing the disposal of 
these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to 
the recorder, remote control or video cassette.

1. DO NOT place the recorder …

… in an environment prone to extreme temperatures or 

humidity.

… in direct sunlight.
… in a dusty environment.
… in an environment where strong magnetic fields are 

generated.

… on a surface that is unstable or subject to vibration.

2. DO NOT block the recorder’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a 
newspaper or cloth, etc., the heat may not be able to get out.)

3. DO NOT place heavy objects on the recorder or remote 

control.

4. DO NOT place anything which might spill on top of the 

recorder or remote control.
(If water or liquid is allowed to enter this equipment, fire or 
electric shock may be caused.)

5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with 

water. Also DO NOT place any containers filled with water or 
liquids (such as cosmetics or medicines, flower vases, potted 
plants, cups, etc.) on top of this unit.

7. DO NOT place any naked flame sources, such as lighted 

candles, on the apparatus.

8. AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move 
it from a cold place to a warm place, or under extremely humid 
conditions—just as water droplets form on the surface of a glass 
filled with cold liquid. Moisture condensation on the head drum 
will cause damage to the tape. In conditions where condensation 
may occur, keep the recorder turned on for a few hours to let the 
moisture dry.

Video heads cleaning

The heads get dirty in the following cases:

in an environment prone to extreme temperature or humidity

in a dusty environment

flaw, dirt or mold on video tapes

continuous usage for a long time

Use a dry cleaning cassette — TCL-2 — when:

Rough, poor picture appears while a tape is played back.

The picture is unclear or no picture appears. 

“USE CLEANING CASSETTE” appears on the screen (only with 
“O.S.D.” set to “ON” (

13)).

Usable cassettes

Compact VHS camcorder recordings can 
be played on this video recorder. Simply 
place the recorded cassette into a VHS 
Cassette Adapter and it can be used just 
like any full-sized VHS cassette.

This video recorder can record on regular VHS and Super VHS 
cassettes. While only VHS signals can be recorded on regular 
VHS cassettes*, both VHS and Super VHS signals can be 
recorded and played back using Super VHS cassettes.

* By using the S-VHS ET function, it is possible to record and play back 

with S-VHS picture quality on VHS cassettes with this recorder (

14).

POWER SYSTEM

This set operates on voltage of AC110 V – 240 V

d

 (Rating), 

AC90 V – 260 V

d

 (Operating), 50 Hz/60 Hz with automatic 

switching.

The 

1

 button does not completely shut off mains power from 

the unit, but switches operating current on and off. “

`

” shows 

electrical power standby and “

!

” shows ON.

Video tapes recorded with this video recorder in the LP (Long 
Play) or EP (Extended Play) mode cannot be played back on a 
single-speed video recorder.

ATTENTION

TO MOBILE PHONE USER:

Using a mobile phone in the vicinity of the recorder may cause 
picture vibration on the TV screen or change the screen to a 
blue back display.

ON PLACING THE RECORDER:

Some TVs or other appliances generate strong magnetic fields. 
DO NOT place such appliance on top of the recorder as it may 
cause picture disturbance.

HR-S6970AG.AJ_EN.fm  Page 2  Monday, September 27, 2004  12:12 PM

Summary of Contents for HR-S6970AA

























Reviews: