advanced features
54
[
1
]
a
k
[MENU]: EXIT
CLOCK SET
TIME
DATE
YEAR
0: 00
01 . 01
03
JUST CLOCK : ON
TV PR.
:
1
Clock Set
You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
• The VCR’s memory backup has expired
• You want to change the Just Clock setting
Setting the Clock
get to the clock set screen
Press
MENU
button. Move the highlight bar to
CLOCK SET
using the
PR
and
PR
buttons and press
OK
button (or ).
set time and date
When the
CLOCK SET
screen appears, the time will be blinking. Use the
PR
and
PR
buttons to set the correct time (
pressing and holding will advance the time in 30 minute
increments
) and then press
OK
button (or ). The date will blink. Use the
PR
and
PR
buttons to set the correct date (
pressing and holding will advance the date in 15 day increments
) and
then press
OK
button (or ). Set the correct year in the same
way and press
OK
button.
set just clock
Set as desired using the
PR
and
PR
but-
tons then press
OK
button (or
).
set preset for clock data source
If you have set
JUST
CLOCK
to
ON
, you will need to specify a preset (station) for
JUST
CLOCK
to take its source data from. Use the
PR
and
PR
buttons to select the preset and press
OK
button (or
).
start clock oper ation
Press
MENU
button.
NOTE:
If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (
including the adjustment for British Summer Time
). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting
Just Clock
to
ON
, you are
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
HR-S6975EK-EN/p54-59
3/12/04, 03:21 PM
54
