Page 11
April 17, 2001 9:00 am
— 11 —
Program overlap warning display
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, you have another program overlapping the program you
have just made. The Program Check screen appears and
conflicting programs will start blinking.
Example:
Program 1 (you have just made) and Program 4 overlap each
other
A
Select program to modify
Press
rt
, then press
e
.
●
You can only select one of the
overlapping programs.
●
If you do not mind this overlap, press
PROG
to finish the timer program
setting. The program starting earlier or
program with the lower program number will be recorded.
B
Cancel or change program setting
To cancel a program,
press
&
(
CANCEL
)
when the Program screen you do not want
is shown.
To change a program,
press the
appropriate button:
START+/–
,
STOP+/–
,
DATE+/–
,
PR+/–
, and/or
SP/EP
(
p
)
when the Program screen on which you want to make changes is
shown, then press
OK
.
●
If the overlap is not yet solved, the conflicting programs will be
shown on the Program check screen. Repeat the above steps
again.
Other Functions
Checking tape position
When you change the VCR operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search or Instant Review, the tape
position indicator appears.
The position of “
q
” in relation to “B”
(Beginning) or “E” (End) shows you where
you are on the tape.
●
Set “SUPERIMPOSE” to “ON”.(
墌
pg. 12)
Changing display information
Each time you press
– –:– –
, the display panel
shows the channel number and the clock time
alternatively.
●
You can change display in the stop, recording or
during rewind/fast-forward high-speed search.
●
When “SUPERIMPOSE” is set to “ON”
(
墌
pg. 12) and
– –:– –
on the Remote is pressed, time counter
will appear on the TV screen. To reset the time counter, press
0000
on the Remote.
Timer warning display
A warning appears on the TV screen to tell
you that the timer-recording is to start in
5 minutes if you are not in the timer
recording standby mode at that time. Press
#
to put the VCR into timer recording
standby mode. To clear the display, press
&
(
CANCEL
) on the Remote.
Tape Remaining Time
Press
– –:– –
to display the tape remaining time on the screen.
NOTES:
●
Set “SUPERIMPOSE” to “ON” (
墌
pg. 12) to display the
indication on the screen.
●
Depending on the type of tape used, the tape remaining time
may not appear right away, or is not correct. “
– –:– –
“ may
sometimes appear, or the display may blink on occasion.
( , ), THEN ( ) (PROG.) : END
PR
START
STOP
CH
DATE
1
8:00P
10:00
12
12/24
2
10:00A
10:45
40
12/25
3
11:30P
1:00 125
12/25
4
9:00P
10:00
10
12/24
5
6
7
8
PROGRAM NOT COMPLETED
PROGRAM OVERLAP
( , ), THEN ( ) (PROG.) : END
PR
START
STOP
CH
DATE
1
8:00P
10:00
12
12/24
2
10:00A
10:45
40
12/25
3
11:30P
1:00 125
12/25
4
9:00P
10:00
10
12/24
5
6
7
8
PROGRAM 4
START
STOP
9:00PM
10:00PM
DATE
CH
12/24/02
10 SP
TUE
PRESS (CANCEL) TO CANCEL
PRESS (OK) TO CONFIRM
PRESS (PROG.) TO END
B
+
+
+
E
REMAIN
1:00
COUNT
1:23:45
– WARNING–
TIMER RECORDING
TO START SOON
(CANCEL)
– Timer Recording –
+5-80(1IP3DJH7XHVGD\$SULO$0
