JVC HR-S8009UM Instructions Manual Download

Page: 13 / 16

Page 13

April 5, 2001 8:55 am

— 13 —

䡵

BLUE BACK

—

/OFF

When this function is set to “ON”, the TV screen becomes all blue
when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals,
set this function to “OFF”.

䡵

2ND AUDIO RECORD

— ON/

OFF

●

When this function is set to “ON”;

If a SAP program is received, the SAP audio is recorded on both
the normal and Hi-Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on
both the Hi-Fi and normal tracks.

●

When this function is set to “OFF”,

the SAP audio cannot be

recorded.

NOTES:

When the channel is changed on the VCR;

●

The “STEREO” indication appears on the screen for about
5 seconds if the program is a stereo broadcast.

●

The “SAP” indication appears on the screen for about 5 seconds
if the program is a SAP broadcast.

●

Both indications appear when a stereo program is accompanied
by SAP sound.

䡵

AUDIO MONITOR

—

HI-FI

/HI-FI L/HI-FI R/NORM/MIX

This VCR can record two sound tracks simultaneously (normal
and Hi-Fi) on a Hi-Fi stereo tape. You can select the sound track(s)
to listen to while playing back a Hi-Fi stereo tape. In addition,
when playing back a prerecorded tape containing two separate
audio programs on the Hi-Fi tracks, you can choose either one by
selecting either “HI-FI L” or “HI-FI R”.

HI-FI

: Normally select this. Hi-Fi sound is played back.

HI-FI L

: Sound on the left Hi-Fi channel is played back.

HI-FI R

: Sound on the right Hi-Fi channel is played back.

NORM

: Sound on the normal track is played back.

MIX

: Both sounds on the Hi-Fi track and normal track are mixed

and played back.

NOTES:

●

While playing back a monaural tape, sounds on the normal
track will be heard regardless of this setting.

●

If RF connection is used for viewing pictures on the TV, sound
will be monaural even though you select “HI-FI”.

●

You can also use the

AUDIO

button on the Remote to select the

desired monitor sound.

䡵

S-VHS MODE

—

/OFF

You can determine which recording mode — either S-VHS mode
or VHS mode — is used for recording on S-VHS tapes.

●

When this function is set to “ON”

, you can record on S-VHS

tapes with S-VHS picture quality.

●

When this function is set to “OFF”

, you can record on S-VHS

tapes with VHS picture quality.

●

S-VHS mode allows you to make high quality video recordings
with horizontal resolution of 400 lines, comparing with the 230
lines of resolution of conventional VHS recordings. To achieve
the highest quality picture we recommended to record in S-VHS
mode. (But remember that a conventional VHS VCR without
SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)

●

S-VHS MODE setting does not affect recording on VHS tapes.
Recording on VHS tapes is always performed in VHS mode
except when using S-VHS ET mode (

墌

pg. 12).

Child Lock

You can disable the VCR operations. While the VCR is turned on,
press and hold

POWER

on the Remote for more than

10 seconds. The VCR turns off, “CL” appears for about 5 seconds
on the display panel.
To release the child lock, press and hold

POWER

on the

Remote until the VCR turns on.

NOTES:

●

Pressing

during timer recording, unplugging the AC power

cord or a power outage also releases the child lock.

●

When the child lock function is in use, keep the Remote out of
the children’s reach.

●

Timer recording programs will be performed even if the child
lock function activated

Multi-Brand Remote Control

This Remote can control some functions of remote controllable
TVs, cable boxes or DBS (Direct Broadcast Satellite) receivers
listed below. Without setting, you can control a JVC TV.

NOTES:

●

Some unit’s brands have more than one code. If the unit does
not function with a specified code, try other codes.

●

Depending on the type of unit, some or all functions cannot be
operated using this Remote.

●

It’s not possible to operate a unit not equipped with a remote
sensor.

●

It’s not possible to set the Remote for both your cable box and a
DBS receiver at the same time.

●

Once you have set the Remote to operate the unit, you do not
have to set it until you replace the batteries from the Remote.

TV Brand Setting