58
EN
SUBSIDIARY SETTINGS (cont.)
ATTENTION
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer program-
ming with S
HOW
V
IEW
in this state, the “GUIDE PROG SET”
screen appears; set the Guide Program numbers on this
screen.
Z
“ATTENTION – Regarding Guide Program
Number Set” on pg. 29.
Or perform “Guide Program Number Set” (
Z
pg. 66).
Storing Channels Manually
Store channels that were not stored during Auto Set Up (
Z
pg.
6), Preset Download (
Z
pg. 8) or Auto Channel Set (
Z
pg. 56).
SELECT BAND
4
Press
%fi
to change the
band between CH (regular)
and CC (cable), then
press
#
.
INPUT CHANNEL
5
Press the NUMBER keys to input the channel number you
want to store.
●
Input "0" before any single number entries.
●
To input the registered station name (ID –
Z
pg. 61),
press
#
until "----" (ID setting) begins blinking, then
press
%fi
.
●
For fine tuning adjustment, press
#
until "+/–" begins
blinking, then press
%fi
. While tuning, “+” or “–”
appears.
●
When storing a channel that sends scrambled
broadcasts, press
#
until "OFF" (Decoder setting)
blinks, then press
%fi
to set "DECODER" to "ON"
("OFF" is the default setting).
●
When "AV2 SELECT" is set to "AV2", the "DECODER"
setting cannot be changed (
Z
pg. 44).
ENTER NEW CHANNEL
INFORMATION
6
Press OK and the Confirmation screen appears.
●
Repeat steps 3 through 6 as necessary.
CLOSE CONFIRMATION
SCREEN
7
Press MENU.
●
To change positions, see "Change Station Channel
Position" (
Z
pg. 59).
●
If you wish to set station names other than the ones
registered in your recorder,
Z
"Set Stations (B)" on
page 60.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press
%fi
to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or
#
. The Confir-
mation screen appears.
SELECT POSITION
3
Press
%fi
@ #
until an
open position in which
you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
(Ex.) To store in position 12.
∞
∞
PR
CH
ID
PR
CH
ID
01
25 ARD
08
C26 E-SP
02 CDB SKY1
09
55 WEST
03
10
ZDF
10
C24 SAT1
04 C65
RAI1
11
C23 OSF
05 C31
BBC1
12
– – – –
06 C32
BBC2
13
– – – –
07 C33
3SAT
14
– – – –
[
5∞
]
=
: EDIT
=
[X] : DELETE
[MENU] : EXIT
PR CH
ID
FINE DECODER
12 CH01 – – – – +/–
OFF
[
5∞
] : SELECT
[
] : CURSOR
+=
: OK
[MENU] : EXIT
∞
∞
1
2
3
4
5
6
7
8
9
1
2
3
4
1
2
3
4
– –:– –
0
NUMBER
OK
MENU
Summary of Contents for HR-S8600EK
Page 75: ...EN 75 MEMO ...