61
Auto SP
→
LP Timer
If, when timer-recording in SP mode, there is not enough tape to
record the entire programme, the recorder automatically
switches to LP mode to allow complete recording.
For Example . . .
Recording a programme of 210 minutes in length onto a 180-
minute tape
NOTES:
●
The Auto SP
→
LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180 or with some tapes
of shorter lengths.
●
If you have programmed the recorder to timer-record 2 or more
programmes, the second programme and those thereafter may
not fit on the tape if you set "AUTO SP
→
LP TIMER" to "ON". In
this case, make sure the mode is not engaged, then set the tape
speed manually during timer programming.
●
In order to ensure that the recording fits on the tape, this
feature may leave a short non-recorded section at the end of
the tape.
●
There may be some picture noise and sound disturbance at
the point on the tape where the recorder switches from SP to
LP mode.
●
If you perform timer recording with both PDC and the Auto
SP
→
LP Timer activated, and the programme goes beyond its
originally scheduled length, there may be times when the
programme cannot be recorded in its entirety.
Total 210 minutes
Approximately 150 minutes
Approximately 60 minutes
SP mode
LP mode
Make sure you set "AUTO SP
→
LP TIMER" to "ON" at the Mode
Set screen before the timer-recording starts.
ACCESS MAIN MENU
SCREEN
1
Press
MENU
.
ACCESS MODE SET
SCREEN
2
Press
%fi
to move the highlight bar (pointer) to "MODE
SET", then press
OK
or
#
.
SELECT MODE
3
Press
%fi
to move the
highlight bar (pointer) to
"AUTO SP
→
LP TIMER",
then press
OK
or
#
to select
"ON".
RETURN TO NORMAL
SCREEN
4
Press
MENU
.
MODE SET
B. E.
S. T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O. S. D.
ON
DIRECT REC
ON
AUTO SP
=
LP TIMER
ON
DIGITAL 3R
ON
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
Auto Timer
When "AUTO TIMER" is set to "ON" the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press
MENU
.
ACCESS MODE SET SCREEN
2
Press
%fi
to move the
highlight bar (pointer) to
"MODE SET", then press
OK
or
#
.
SELECT MODE
3
Press
%fi
to move the
highlight bar (pointer) to
"AUTO TIMER", then press
OK
or
#
to select either
"ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press
MENU
.
NOTE:
For safety, when "AUTO TIMER" is set to "OFF", all other
recorder functions are disabled while the Timer mode is
engaged. To disengage the timer, press
‰
(
TIMER
).
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
REC LEVEL CTL
R.A.EDIT
VIDEO NAVIGATION
[
5∞
]
=
[MENU] : EXIT
Next Function Memory
The Next Function Memory "tells" the recorder what to do
after rewinding.
Before continuing, make sure the recorder
is in the Stop mode.
a–
For Automatic Start Of Playback After Tape Rewind . . .
. . . press
REW
, then press
PLAY
within 2 seconds.
b–
For Automatic Power Off After Tape Rewind . . .
. . . press
REW
, then press
within 2 seconds.
c–
For Automatic Timer Standby After Tape Rewind . . .
. . . press
REW
, then press
(
TIMER
) within 2 seconds.
MODE SET
B. E.
S. T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
ON
O. S. D.
ON
DIRECT REC
ON
AUTO SP
=
LP TIMER
OFF
DIGITAL 3R
ON
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
