— 15 —
Express Timer Programing
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press
PROG.
on the Remote to access the PlusCode No. screen.
B
Press
START+/–
once to access
Program screen.
Press
START+/–
,
STOP+/–
,
DATE+/–
or
CH+/–
repeatedly to enter the start
time, stop time, date or channel.
●
Press and hold
START+/–
or
STOP+/–
to increase the time in 30-minute
intervals.
●
To set the tape speed, press
SP/EP
(
p
).
●
To timer-record daily (Monday–Friday) or weekly serials,
press
DAILY
(
M-F
) (
Number key “8”
) or
WEEKLY
(
Number
key “9”
). Pressing the button again makes the “DAILY” or
“WEEKLY” display disappear.
●
If you are using a DBS receiver and
“DBS RECEIVER SET” is set to “ON”,
the band indication appears under
the channel number indication.
(Refer to “Cable Box and/or DBS
Receiver Control Setting” (
墌
pg. 8).)
TV:
To timer-record a regular TV
broadcast received on the VCR.
CATV: To timer-record a cable TV broadcast received on the
VCR, or through a cable box (unless “CABLE BOX
SET” is set to “OFF”).
DBS: To timer-record a satellite broadcast received through
a DBS receiver.
If the channel number entered requires that the band be set
and “7=DBS” is displayed on the screen, press
DBS
(
Number
key “7”
) to select “DBS”.
C
Press
OK
or
PROG.
.
●
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, see “Program overlap warning display” (
墌
pg. 16).
D
Press
TIMER
(
#
). The VCR turns off automatically and “
#
” is
displayed on the display panel.
24HR Quick Programing
You can program a timer recording that starts within 24 hours
using the ADVANCED JOG dial on the VCR.
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press
24HR QUICK PROGRAM
on the
VCR. “
” starts blinking on the
display panel.
B
Turn the
ADVANCED JOG
dial to the
left or right to set the start time.
●
One click stop of the ADVANCED
JOG dial changes the time in 5-
minute intervals.
C
Push the
ADVANCED JOG
dial. “
”
starts blinking on the display panel.
Turn the
ADVANCED JOG
dial to the
left or right to set the stop time.
●
To set the tape speed, press
SP/EP
(
p
).
D
Push the
ADVANCED JOG
dial. Turn
the
ADVANCED JOG
dial to the left or right to select the
channel, then press
24HR QUICK PROGRAM
. The VCR turns
off automatically and “
#
” is displayed on the display panel.
NOTES:
●
If “Err” appears on the display panel, repeat the above steps
again.
●
When a menu screen is shown, you cannot use 24HR Quick
Programing function. Press
MENU
to return to normal screen,
and try again.
●
You can use 24HR Quick Programing function also when the
VCR is turned off.
●
For 24HR Quick Programing function, the program overlap
warning display does not appear even if some programs overlap
each other.
To use the VCR while it is in timer recording standby
mode
Press
TIMER
(
#
), then press
POWER
. After you use the VCR, press
TIMER
(
#
) again to put the VCR into timer recording standby
mode.
Checking, canceling or changing program settings
A
Disengage timer
Press
TIMER
(
#
), then press
POWER
.
●
When “AUTO TIMER” is set to “ON” (
墌
pg. 20), you do not
have to press
TIMER
(
#
).
B
Access Program Check screen
Press
PROG. CHECK
.
C
Access Program screen
Press
PROG. CHECK
again. Each time you
press
PROG. CHECK
, the next program’s
Program screen appears.
D
Cancel or change program setting
To cancel a program,
press
CANCEL
when the Program screen you
do not want is shown.
To change a program,
press the appropriate button:
START+/–
,
STOP+/–
,
DATE+/–
,
CH+/–
,
DAILY
(
M-F
) (
Number key “8”
),
WEEKLY
(
Number key “9”
), and/or
SP/EP
(
p
) when the
Program screen on which you want to make changes is shown.
E
Return to normal screen
Press
PROG. CHECK
repeatedly until no Program screen is
shown.
F
Reengage timer recording standby mode
Press
TIMER
(
#
). The VCR turns off automatically and “
#
” is
displayed on the display panel.
●
When “AUTO TIMER” is set to “ON” (
墌
pg. 20), the timer
recording standby mode automatically resumes when you turn
off the VCR.
Start time
Stop time
Channel number
HR-S9911U-EN.fm Page 15 Monday, April 22, 2002 1:34 PM
