— 22 —
Multi-Brand Remote Control
When programed (set) with a manufacturer’s (brand’s) code, this
Remote can perform some of the remote control functions of the
listed TVs, cable boxes and DBS (Direct Broadcast Satellite)
receivers. You can control a JVC TV without setting a brand code.
NOTES:
●
Some unit’s brands have more than one code listed. If after
setting, the remote does not operate the unit, try one of the other
listed codes.
●
Depending on the type of unit, some or all functions cannot be
operated using this Remote.
●
It is impossible to control a unit that does not have a remote
sensor.
●
It is not possible to set the Remote for both your cable box and a
DBS receiver at the same time.
●
Once you have set the Remote to operate a unit, you do not
have to set it again until you replace the Remote’s batteries.
●
If the batteries of the Remote are discharged, the Remote will
not be able to control the TV, cable box or DBS receiver.
Replace the batteries.
TV Brand Setting
A
Turn on TV
Turn on the TV using the Power button on the TV or its Remote.
B
Set TV brand code
A
Press and hold
POWER
on the Remote.
B
Press the
Number keys
to enter your TV’s brand code.
C
Press
STOP
(
8
), and release
POWER
. The TV should turn off.
C
Operate TV
First set the
VCR/TV/CABLE/DBS
selector to “TV”, then press one
of the following buttons:
POWER
,
TV/VCR
,
TV CH+/–
,
^
(TV
Muting),
TV VOL+/–
, and the
Number keys
.
●
For some brands, you must press
ENTER
after having pressed the
Number keys
to enter a channel number.
●
To operate the VCR, set the
VCR/TV/CABLE/DBS
selector back
to “VCR”.
Cable Box or DBS Receiver Brand Setting
A
Turn on cable box or DBS receiver
Turn on the cable box or DBS receiver using the Power button on
the unit or its Remote.
B
Enter brand code
A
Press and hold
POWER
on the Remote.
B
Press the
Number keys
to enter your cable box’s (or DBS
receiver’s) brand code.
C
Press
STOP
(
8
), and release
POWER
. The cable box (or DBS
receiver) should turn off.
C
Operate cable box or DBS receiver
First set the
VCR/TV/CABLE/DBS
selector to “CABLE/DBS”, then
press one of the following buttons:
POWER
,
TV CH+/–
, and the
Number keys
.
●
For some brands, you must press
ENTER
after having pressed the
Number keys
to enter a channel number.
●
To change the cable box’s (or DBS receiver’s) channels, press
TV
CH+/–
or the
Number keys
. (The
CH+/–
button can be used to
change the VCR’s channels only.)
●
To operate the VCR, set the
VCR/TV/CABLE/DBS
selector back
to “VCR”.
Changing Remote Control Code
This Remote is capable of transmitting two different control codes,
A code control signals or B code control signals. This Remote is
preset to send A code signals because your VCR is initially set to
respond to A code signals. You can easily change your Remote
and VCR to send and respond to B code signals. When using two
JVC VCRs, set the two VCRs and their Remotes to different codes,
so that the Remotes can operate the VCRs separately.
A
Set remote control code for Remote
A
Press and hold
A/B
.
B
Press the
Number key
“
2
”.
C
Press
STOP
(
8
), and release
A/B
.
●
The Remote now can transmit B code control signals.
B
Check remote control code for VCR
Press and hold
4
on the VCR for more than 5 seconds while the
VCR is turned off. The code currently set appears on the display
panel.
●
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
●
Set the
VCR/TV/CABLE/DBS
selector on the Remote to “TV”.
TV BRAND
CODE
TV BRAND
CODE
JVC
HITACHI
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
01, 03
10
02
03
04, 11
05
06
SONY
SAMSUNG
SANYO
SEARS
TOSHIBA
ZENITH
07
12
13
13
08
09
●
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
●
Set the
VCR/TV/CABLE/DBS
selector on the Remote to
“CABLE/DBS”.
CABLE BOX BRAND
CODE
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
JASCO
JERROLD
NOVAVISION
OAK
PANASONIC
PULSER
RCA
REGAL
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
01, 05, 17
01, 17
15, 16, 17, 21, 25
15, 16, 17, 21, 25
02
01, 17
15, 16, 17, 21, 25
15
01, 04, 06, 11, 12, 15, 28
10, 18, 23
15
01, 04, 06, 11, 12, 15, 28
02
07
13, 14
15, 16, 17, 21, 25
13, 14
10, 18, 23
01, 16, 17
05, 16, 24
02
07
05, 16, 17, 24, 25
13, 14
05, 15, 16, 17, 21, 24, 25
05, 16, 24
01, 04, 16
01, 17
16, 17, 25
03, 09, 22
03, 09, 22
DBS RECEIVER BRAND
CODE
JVC (DISH Network)
ECHOSTAR (DISH Network)
SONY (DSS)
RCA (DSS)
51
51
41
40
Set the
VCR/TV/CABLE/DBS
selector on the Remote to “VCR”.
HR-S9911U-EN.fm Page 22 Friday, April 26, 2002 11:37 AM
