10
EN
• During playback of the recorded tape in Hi-Fi mode:
• Reception of stereo broadcasts:
• During reception of bilingual broadcasts:
Note: •
If you play non-Hi-Fi tapes, the VCR will play
automatically in monaural even if you select any
mode.
•
If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
Advanced Operations
Counter Memory
This feature can be used to memorize a beginning point that
you want to watch again. Rewinding or fast forwarding makes
it easy to locate this point.
Note: •
If a tape includes both programmes recorded in the
PAL system and ones recorded with NTSC system,
this function may not be operated correctly.
•
“Counter Memory” does not function if the Auto
Repeat mode is set to ON. In this case, set the Auto
Repeat mode to OFF.
1)
Stop the tape at the desired point.
2)
Press
COUNTER 0000 (TAPE COUNTER RESET)
to
display 0:00:00.
3)
Press
COUNTER MEMORY (TAPE COUNTER MEMORY)
so
that “M” appears on the TV screen.
4)
Press
REC
I
or
PLAY
B
/
K
.
•Press
STOP
C
/
L
when recording or playback is
completed.
5)
Press
REW
h
/
{
or
F.FWD
g
/
B
. The VCR will
automatically stop when the counter returns to 0:00:00
(approx.).
To Exit the Counter Memory
Press
COUNTER MEMORY (TAPE COUNTER MEMORY)
so
that the “M” disappears from the TV screen.
Note: •
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing
REC
I
.
1)
Follow steps
1)
to
3)
in “Viewing and Recording the Same
Programme” section on page 9.
2)
Press
REC
I
repeatedly until the desired recording length
appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press
(ON SCREEN)
.
• To change the recording length during an OTR
Press
REC
I
repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press
STOP
C
/
L
.
• To cancel the OTR but continue recording
Press
REC
I
repeatedly until “
I
” appears without the
recording length.
Auto Repeat Playback
The VCR has an auto repeat function that allows you to repeat
a tape indefinitely without touching
PLAY
B
/
K
.
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1)
Press
MENU
.
2)
Press
PLAY
B
/
K
or
STOP
C
/
L
to select “SET UP”, then
press
F.FWD
g
/
B
.
3)
Press
PLAY
B
/
K
or
STOP
C
/
L
to select “AUTO
REPEAT”.
4)
Press
F.FWD
g
/
B
so that “ON” appears next to
“AUTO REPEAT” on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
MENU
to exit,
then press
PLAY
B
/
K
.
Mode
AUDIO OUTPUT
Display on
the TV screen
Stereo
L
Hi-Fi L Audio
STEREO
R
Hi-Fi R Audio
L
L
Hi-Fi L Audio
LEFT
R
Hi-Fi L Audio
R
L
Hi-Fi R Audio
RIGHT
R
Hi-Fi R Audio
Normal
L
Normal Audio
-None-
R
Normal Audio
Mode
AUDIO OUTPUT
Display on
the TV screen
Stereo
L
L Audio
STEREO
R
R Audio
L
L
L Audio
LEFT
R
L Audio
R
L
R Audio
RIGHT
R
R Audio
Monaural
L
L+R Audio
-None-
R
L+R Audio
Mode
AUDIO OUTPUT
Display on
the TV screen
MAIN
L
Main Audio
MAIN
R
Main Audio
SUB
L
Sub Audio
SUB
R
Sub Audio
MAIN
L
Main Audio
MAIN
SUB
R
Sub Audio
SUB
I
I
[0:30]
I
[1:00]...
I
[7:30]
I
[8:00]
(Normal (OTR:
recording) 30 minutes)
HM4N0ED(EN).fm Page 10 Friday, January 13, 2006 5:39 PM
