12
EN
7)
Press
PLAY
B
/
K
or
STOP
C
/
L
repeatedly until the
relevant end hour appears. Next, enter the minute digit.
8)
Press
PLAY
B
/
K
or
STOP
C
/
L
repeatedly until the
relevant channel number appears.
9)
Press
PLAY
B
/
K
or
STOP
C
/
L
repeatedly until the
desired tape speed appears.
10)
Press
F.FWD
g
/
B
. Programme is now completed.
•To set another timer programme, repeat steps
3)
to
10)
.
11)
Press
MENU
to exit.
12)
Press
/I (STANDBY-ON)
to activate the timer.
The
indicator on the display comes on.
To Stop a Timer Programme which has Already
Started
Press
STOP
/
EJECT
C
/
A
on the VCR.
Note: • STOP
C
/
L
on the remote control will not function in
the Timer Recording mode.
To Correct Timer Programmes
If you want to correct an automatic timer after you finished
setting programme,
1)
Repeat steps
1)
to
3)
in the “Timer Recording” section on
page 11.
2)
Select the setting you want to change using
F.FWD
g
/
B
or
REW
h
/
{
.
3)
Enter the correct numbers using
PLAY
B
/
K
or
STOP
C
/
L
, then press
F.FWD
g
/
B
.
4)
Press
MENU
to exit.
5)
Press
/I (STANDBY-ON)
to return to timer standby
mode.
To Cancel or Check the Start/End Time
1)
Repeat steps
1)
to
2)
in the “Timer Recording” section on
page 11.
2)
Select a programme number you want to check using
PLAY
B
/
K
or
STOP
C
/
L
. The details of selected
programme appears on the TV screen. You may cancel the
entire programme by pressing
REW
h
/
{
.
3)
Press
MENU
to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Hint for Timer Recording
• If there is a power failure or if the VCR is unplugged for
more than 30 seconds, the clock setting and all timer
settings will be lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape and the
VCR power will be turned off. The indicator will flash.
• If a tape is not in the VCR, Timer Recording cannot be
performed and the
indicator flashes. If an erase-
prevention tab of the tape is missing, the tape will be
ejected and the indicator will flash. Please insert a
recordable tape.
• When all the Timer Recordings are completed, the
indicator also flashes. To play or eject the recorded tape,
press
/I (STANDBY-ON)
first
, and then press
PLAY
B
/
K
or
EJECT
O
. To rewind the tape to the beginning of the
recorded programmes, press
AUTO RETURN
on the VCR.
• The TV that is connected to your VCR may be turned on
or off when the VCR is in the Timer Recording mode.
• The VCR will only perform a Timer Recording after it has
been placed into timer standby mode.
Auto Return
Using the AUTO RETURN Button
When all the Timer Recordings are completed (the
indicator flashes), press
AUTO RETURN
on the VCR
first
. The
VCR will rewind to the beginning of the recorded
programme(s).
Note: •
If there are any remaining programmes, press
/I (STANDBY-ON)
to turn on the VCR and then
press
AUTO RETURN
. In this case, if you press any
other button once and then press
AUTO RETURN
,
“Auto Return” will not be carried out.
Using the VCR Menu
If there are any remaining programmes including Daily,
Everyday, & Weekly, “Auto Return” will not operate.
1)
Press
MENU
.
2)
Press
PLAY
B
/
K
or
STOP
C
/
L
repeatedly to point to
“SET UP”, then press
F.FWD
g
/
B
.
3)
Press
PLAY
B
/
K
or
STOP
C
/
L
to point to “AUTO
RETURN”, then press
F.FWD
g
/
B
.
“ON” will appear next to “AUTO RETURN”.
4)
Press
MENU
.
Watch the Recorded Timer Programme
Press
/I (STANDBY-ON)
to turn on the VCR, then press
PLAY
B
/
K
.
Parents Lock
Parents Lock prevents use of the VCR by making the VCR
feature buttons on the VCR and the remote control
inoperative.
• The PWR indicator on the display comes on.
1)
Press and hold down
/I (STANDBY-ON)
on the remote
control for 5 seconds until “PL” appears on the display.
The Parents Lock is activated.
When you want to cancel it, press and hold
/I (STANDBY-ON)
on the remote control again for 5
seconds.
When Parents Lock is activated:
• The time will appear on the display. “PL” will appear on
the display for two seconds every minute.
• You may insert a tape. However, the VCR power will
remain off.
• You may press
EJECT
O
to remove the tape (unless a Timer
Recording is programmed or has finished).
• Timer Recording will take place as scheduled, even if
Parents Lock is activated. “P.L.” will appear steadily on the
TV screen during the Timer Recording.
QUICK-FIND
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
1)
Press
QUICK-FIND
.
MENU
TIMER
SET UP
INITIAL
TIMER NUMBER 1
START
END
DATE
CHANNEL
SPEED
--/--
--:--
--:--
--
--
9:00
10:00
11:00
Programme 1
Programme 2
Programme 3
HM4N0ED(EN).fm Page 12 Friday, January 13, 2006 5:39 PM
