41
Assemble
Editing
Assemble Editing adds one recorded scene to another in
succession.
To use your VCR as the recorder ...
LOAD CASSETTES
1
Insert the original cassette in the player, and the
recording cassette in the recorder.
SET TAPE SPEED
2
Set to "SP" or "EP" by pressing the SP/EP button on the
remote control.
ENGAGE RECORD-
STANDBY MODE
3
Press and hold PAUSE, and press REC.
FIND EDIT START POINT
4
Play back the original tape until you reach the scene to
be edited.
START EDITING
5
When you reach the scene on the original tape to be
edited, press PLAY to initiate the recorder’s record
mode.
STOP EDITING
6
Press PAUSE to pause the tape in the recorder.
CONTINUE EDITING
7
Repeat steps 4 through 6 to add additional scenes.
NOTE:
Assemble Editing is also possible using your VCR as the
playback deck.
1
2
4
5
3
6
8
0
7
9
2
2
q
5
/
8
6
PLAY
PAUSE
REC
PLAY
PAUSE
REC
SP/EP
