34
EN
You can directly program the VCR’s timer to record up to 8
shows, as far as a year in advance. Remember, the clock must be
set before you can program the timer (
墌
pg. 8 or 11).
Express Timer
Programming
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it into
the VCR.
●
The VCR comes on, and the counter is reset,
automatically.
ACCESS VCR PLUS+
SCREEN
2
Press
PROG.
ACCESS PROGRAM
SCREEN
3
Press
START +/–
. (If you’re
just starting out,
“PROGRAM 1” appears.)
SET PROGRAM START TIME
4
Press
START +/–
to enter
the time you want record-
ing to start.
●
Press and hold
START
+/–
to move in 30-minute
increments, or press and
release repeatedly to
move 1 minute at a time.
SET PROGRAM STOP TIME
5
Press
STOP +/–
to enter the time you want recording to
stop.
●
Press and hold
STOP +/–
to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
SET PROGRAM DATE
6
Press
DATE +/–
. (The current date is displayed on
screen. The date you enter appears in its place.)
1
2
3
4
5
6
7
8
9
0
2
4
1
3
PROG.
START+/–
STOP+/–
DATE+/–
[VP473U]
[VP673U]
TIMER RECORDING (cont.)
PROGRAM 1
START
STOP
– –:– –AM
=
– –:– –AM
DATE
CH
– –/– –/– –
– – –
SP
PRESS (+/–, SP/EP, 8=DAILY,
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
PROGRAM 1
START
STOP
8:00 AM
=
– –:– –AM
DATE
CH
– –/– –/– –
– – –
SP
PRESS (+/–, SP/EP, 8=DAILY,
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
