46
EN
EDITING (cont.)
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
●
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
●
If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Set to "AUX". Press the
NUMBER
key “0” and/or
CH
to
select depending on the connector being used – "L-1"
for the rear AUDIO/VIDEO IN connector, or "F-1" for
the front AUDIO/VIDEO IN connector.
If you’re using a JVC Master Edit Control-equipped
camcorder — step
4
If not — step
8
ACCESS MAIN MENU
SCREEN
4
Press
MENU
.
ACCESS FUNCTION SET
SCREEN
5
Press
CH
5∞
or
SHUTTLE PLUS
%fi
to move the
highlight bar (arrow) to “FUNCTION SET”, then press
OK
or
SHUTTLE PLUS
.
7
8
9
0
4
1
3
NUMBER "0"
SHUTTLE PLUS
MENU
OK
CH
%
OK
MENU
Recorder
Your VCR
To rear panel PAUSE/AV
COMPULINK connector
Mini-plug cable (not supplied)
(JVC camcorder only)
Audio/Video cable
(not supplied)
Player
VIDEO OUT
AUDIO OUT
EDIT
VIDEO IN
AUDIO
IN
Camcorder
Summary of Contents for HR-VP655U
Page 63: ...EN 63 MEMO ...
