background image

4

 EN

SERVICING

1. Servicing

If your product is not operating correctly or exhibits a marked
change in performance and you are unable to restore normal
operation by following the detailed procedure in its operating
instructions, do not attempt to service it yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.

2. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water.
d.If the product does not operate normally by following the

operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in

performance—this indicates a need for service.

3. Replacement Parts

When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock or other hazards.

4. Safety Check

Upon completion of any service or repairs to this product, ask
the service technician to perform safety checks to determine
that the product is in safe operating condition.

HOW TO USE THIS INSTRUCTION

MANUAL

The Index on pages 54 – 57 lists frequently-used terms, and
the number of the page on which they are used or explained
in the manual. This section also illustrates the controls and
connections on the front and rear panel, the front display
panel and the Remote.

The 

 mark signals a reference to another page for

instructions or related information.

Operation buttons necessary for the various procedures are
clearly indicated through the use of illustrations at the
beginning of each major section.

BEFORE YOU INSTALL YOUR NEW

VCR . . .

. . . please read the sections/literature listed below.

”CAUTIONS” on page 2

”IMPORTANT PRODUCT SAFETY INSTRUCTIONS” on the
previous pages

USE

1. Accessories

To avoid personal injury:
• Do not place this product on an unstable cart, stand, tripod,

bracket, or table. It may fall, causing serious injury to a child
or adult, and serious damage to the product.

• Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer or sold with the product.

• Use a mounting accessory recommended by the

manufacturer and follow the manufacturer’s instructions for
any mounting of the product.

• Do not try to roll a cart with small casters across thresholds or

deep-pile carpets.

2. Product and Cart Combination

A product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.

3. Water and Moisture

Do not use this product near water—for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in a wet basement,
or near a swimming pool and the like.

4. Object and Liquid Entry

Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short-
out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.

5. Attachments

Do not use attachments not recommended by the manufacturer
of this product as they may cause hazards.

6. Cleaning

Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.

7. Heat

The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.

PORTABLE CART WARNING
(Symbol provided by RETAC)

Summary of Contents for HR-VP782U

































































Reviews: