background image

Page 15

November 17, 2000 12:37 pm

FOR SERVICING (Only in U.S.A.)

HOW TO LOCATE YOUR JVC SERVICE CENTER

JVC SERVICE & ENGINEERING 

COMPANY OF AMERICA

ACCESSORIES

Don’t service the product yourself.

TOLL FREE: 1-800-537-5722

http://www.jvc.com

Dear Customer,

In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the 
unit. In the event that repair is necessary, or for the address nearest your location within the Continental United States, 
please call 1-800-537-5722 for your nearest authorized servicer or visit our website at www.JVC.com. Remember to 
retain your Bill of Sale for Warranty Service.

— JVC

DIVISION OF JVC AMERICAS CORP.

Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and 
production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC 
is world famous. The JVC service and engineering organization stands behind our products.

NATIONAL HEADQUARTERS

JVC SERVICE & ENGINEERING COMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORP.

10 New Maple Avenue

Pine Brook, NJ  07058-9641

To purchase accessories for your JVC product, you 
may contact your local JVC Dealer.
From the 48 Continental United States call toll free:
1-800-882-2345 or on the web at www.JVC.com

CAUTION

To prevent electrical shock, do not open the cabinet. 
There are no user serviceable parts inside.
Please refer to qualified service personnel for repairs.

HR-VP790U-EN.fm  Page 15  Friday, November 17, 2000  12:37 PM

Summary of Contents for HR-VP790U

















Reviews: