Before Operation - VCP part
PREP
ARA
TION
13
How to using the main menu
This VCP can easily be programmed by using the
menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
11
Switch on your TV set and video player by pressing
1
1
.
22
Press
VCP
.
33
Press
MENU
.
The main menu will appear on the TV screen.
O
F.OSD ON/OFF -
To switch the display of opera-
tional mode of your VCP ON or
OFF (see p 24).
O
OPR -
To improve the playback picture
(see p 18).
O
DR -
To check a problem with your VCP
(see p 24).
O
ABC OSD -
To change the language setting for
OSD.
You can select the language
between English and Russian.
O
KARAOKE -
To switch on or off Karaoke &
Karaoke Search (see p 26).
O
SCORE -
To display the score your song when
you Karaoke (see p 26).
O
SYSTEM -
Select the colour system used for
playback and recording.
The system is changed as shown
below. (Refer to the right for more
information.)
*
If you want to record NTSC signals,
press
OK
and select between
NTSC 3.58 and NTSC 4.43.
44
Press
1
and
2
to select the option to change,
then Press
OK
to change the setting and
press
1
and
2
to select the sub menu.
55
Press
MENU
to remove the menu screen.
To set the colour system
If streaks appear during playback, set colour system
manually to conform to the system that the tape was
recorded in. (Normally set the switch to AUTO.)
If your tape was Set colour
If your TV is
recorded in
system to
PAL
PAL
NTSC3.58
MULTI-SYSTEM TV
NTSC-PB
PAL TV
NTSC4.43
MULTI-SYSTEM TV
NTSC-PB
PAL TV
MESECAM
MESECAM
MULTI-SYSTEM TV
OPR
DR
VCR
A B
C
OSD
Source
Mode
System Change
Recording AUTO
→
PAL
→
MESECAM
Playback AUTO
→
PAL
→
MESECAM
Recording NTSC3.58
→
NTSC4.43
*
Playback
NTSC-PB
→
NTSC3.58
→
NTSC4.43
PAL/
MESECAM
NTSC
NTSC4.43
NTSC3.58