19
Preparation
OTHERS
The Auto Play, and B.L.E. settings can be changed.
PBC
Set Playback Control (PBC) to On or Off.
On:
Video CDs with PBC are played according to the
PBC.
Off:
Video CDs with PBC are played the same way
as Audio CDs.
Auto Play
You can set up the DVD+VCR so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On:
Auto Play function is active.
Off:
Auto Play function is not active.
Note:
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures.
Set your preference and monitor’s ability.
On:
Expanded grey scale. (0 IRE cut off)
Off:
Standard grey scale. (7.5 IRE cut off)
REMOTE CONTROL FUNCTION
Remote Control A/B/C Code Switching
The remote control is capable of controlling three
JVC video units independently. Each of the units can
respond to one of three codes (A, B or C).
The remote control is preset to send C code signal
because your unit is initially set to respond to C code
signal. You can easily modify your unit to respond to
A or B code signal.
•
Keep pressing
ENTER
down during step 1.
1. Press the
number Key “1”
for A,
“2”
for B or
“3”
for C to change the remote control code.
2. Press
1
/ I on the unit to turn off the unit with no
video-tape inserted.
3. Press
B
on the unit for over 5 seconds while the
unit is turned off. The code currently set appears
on the front display panel.
4. Press
x
on the remote control to change the
unit's code. The code currently set on the remote
control blinks on the front display panel for
approximately 5 seconds, and is applied to the
unit.
DVD
VCD
On
PBC
OTHERS
Move
Select
On
Auto Play
Off
B.L.E.
1
1
/ I
B
ENTER
1-3
x
