background image

56

Language Picture

Parental Other

Sound

Menu
Subtitle
Audio

English

Automatic

English

/Enter/Setup/Return

Setting audio soundtrack language/Setting surround sound

Press 

 or ENTER.

Press 

 or 

 to select your

desired Audio Language, then
press ENTER.

1

Press SET UP MENU in the stop
mode.
Press 

 or 

 to select “Language”.

2

3

To make SETUP screen disappear, press SET UP MENU.

4

NOTES:

If the selected language is not
recorded on the disc, the original
language will be heard.
The “SPATIALIZER N-2-2” is effective
only for the sound of disc.

The same audio soundtrack language
can always be selected by your unit
even if you replace the disc or turn
the power off.

• English, Francais, Espanol:

The language you have selected will play if it is recorded on
the disc.

• Other: If you want to select another language,

enter the language code (See the Language code list on page
61).

• Original: The unit will select the first priority language of each

disc.

Press 

 or ENTER.

Then press 

 or 

 to select

“Audio”.

Menu

Subtitle

Audio

English

Automatic

English

Francais

English

Espanol

Other

Original

/Enter/Setup/Return

Language Picture

Parental Other

Sound

Turn ON the TV and set to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light.)

Preparation:

/Enter/Setup/Return

Language Picture

Parental Other

Sound

Setting surround sound

This DVD/VCR equipped with a “SPATIALIZER N-2-2”. It can
produce the effect of being in a cinema or a concert hall.

1

During disc playback press
A. MONITOR.

Press 

 to select “On”.

2

To cancel Surround mode:
Follow the right steps 1~2, then press 

 to select the “Off” position.

Setting audio soundtrack
language

1/8 Eng Dolby Digital

Spatializer Off

1/8 Eng Dolby Digital

Spatializer On

Summary of Contents for HR-XVC25U





































































Reviews: