Masterpage:Right-No-Heading
EN
45
Filename [XVC33UM_08DVD.fm]
Page 45
4 August 2003 6:47 pm
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press
PAUSE
(
9
).
2
Activate frame-by-frame playback.
Press
PAUSE
(
9
) to advance a still picture.
●
To resume normal playback, press
PLAY
(
4
).
Slow Motion
During playback, press
PAUSE
(
9
), then press
REW
(
3
)
for reverse slow motion playback, or
FF
(
5
) for forward
slow motion playback.
●
Each press of
FF
(
5
) changes the playback speed as follows:
1/32
]
1/16
]
1/4
]
1/2
●
Each press of
REW
(
3
) changes the playback speed as
follows (only for DVD VIDEO discs):
–1/32
]
–1/16
]
–1/4
]
–1/2
●
To resume normal playback, press
PLAY
(
4
).
NOTES:
●
Reverse slow motion playback is possible only with the DVD
VIDEO discs.
●
This function may not works for some Video CD or SVCD.
Resume Function
It is possible to memorize the position where you stop playback
and resume playback from that position.
●
Be sure to set “RESUME” to “ON” or “DISC RESUME”.
(
墌
pg. 81)
1
Memorize the resume point.
Press
STOP
(
8
) during playback.
●
“RESUME STOP” appears on the front display panel.
●
The unit enters Resume Stop mode and memorise the position
where you stop playback as the resume point.
●
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
“RESUME” is set to “DISC RESUME”. (
墌
pg. 81)
●
To clear the resume point:
When “RESUME” is set to “ON”:
• Press
STOP
(
8
) in stop mode.
• Press
POWER
(
1
) to turn off the unit.
• Eject the disc.
When “RESUME” is set to “DISC RESUME”:
• Set “RESUME” to “OFF”. (
墌
pg. 81)
• Press
STOP
(
8
) in stop mode.
2
Resume playback.
Press
PLAY
(
4
). The unit start playback from the resume
point.
●
“RESUME PLAY” appears on the front display panel.
NOTES:
●
Resume Function does not work on the Audio CD. It also may
not work depending on the discs.
●
If you stop the playback of a disc for which an resume point
has already been memorized, the memory will be updated
with the new resume point.
●
After the unit has memorized the resume point for 30 discs,
remembering a new resume point will cause the unit to delete
the oldest memorized point. Stopping playback of a disc for
which a resume point is already stored may change the order
in which the points are stored. This may potentially change the
order in which points are deleted.
●
When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
●
This function may not works for some Video CD or SVCD.
Zooming
Press
ZOOM
during playback or while paused.
●
Each press of
ZOOM
changes the magnification as follows:
1.8x
]
4x
]
8x
]
16x
]
32x
]
64x
●
When a 16:9 aspect picture source is displayed on a 4:3
aspect TV (conventional TV) in Letter Box conversion mode,
the margins in black shown on top and bottom of the TV
screen will be cropped by selecting 1.8x imagination. In such
a case, note that both left and right side parts of the picture
will also be cropped.
●
While zoomed, the picture may look coarse or distorted.
Press
rt w e
to move the zoomed-in scene.
●
To resume normal playback, press
OK
.
Current magnification
Zoomed-in area
XVC33UM_01.book Page 45 Monday, August 4, 2003 7:24 PM
