11
Remote control buttons and functions
DISPLAY button
You can display the PR LIST, programme
number or VIDEO terminal number on the
screen.
Press the DISPLAY button.
Press the DISPLAY button changes the
display as follows:
Choose a TV channel or a
VIDEO terminal
1 Press the DISPLAY button to display
the PR LIST.
2 Press the
and
buttons to
choose a programme number or
VIDEO terminal.
Then press the MENU/OK button.
For programme numbers with the
CHANNEL GUARD function set, the
n
(CHANNEL GUARD) mark is
displayed next to the programme
number in the PR LIST.
The VIDEO terminals are registered
after the programme number PR99.
The AV channel (channel number 0) in
the PR LIST will be chosen only if you
connect the VCR to the TV with an
aerial cable without connecting a video
cable.
COLOUR SYSTEM button
The colour system is chosen automatically.
However, if the picture is not clear or no
colour appears, choose the colour system
manually.
Press the COLOUR SYSTEM button to
choose the appropriate colour system.
AUTO:
This function detects a colour system from
the input signal.
The AUTO mode may not function
properly if you have poor signal quality.
If the picture is abnormal in the AUTO
mode, choose another colour system
manually.
The AUTO mode detects a colour
system from the input signal and
chooses the appropriate colour system
automatically.
For the colour systems in each country
or region, see the table
BROADCASTING SYSTEMS
on
page 12.
PAL/SECAM/NTSC3.58/NTSC4.43:
PAL, SECAM, or NTSC colour system.
SOUND SYSTEM button
The sound system is chosen automatically.
However, if you cannot hear the sound
normally even when the picture appears
normally, choose the sound system
manually.
Press the SOUND SYSTEM button to
choose the appropriate sound system.
B/G
: B/G system
I
: I system
D/K
: D/K system
M
: M system
This function does not work in the
VIDEO mode.
For the sound systems in each country
or region, see the table
BROADCASTING SYSTEMS
on
page 12.
No indication
