25
Using the TV
s menu
3 Set the picture effect.
Press the
6
button to choose an item
listed in the following table and press the
5
button to choose one of options.
As explained in the table, the
PICTURE EFFECT for the video inputs
is set to OFF when shipped. To use it,
you need to set it ON.
*: When shipped
For details of each item, see
PICTURE MODE
on page 20,
DIGITAL VNR
on page 21,
WHITE
BALANCE
on page 21,
DigiPure
on
page 22.
Pressing the number button
0
will
return the picture effect to the factory
set value.
4 Press the MENU/OK button to
complete the setting.
SOUND SETTING menu
STEREO / I
II
When you are viewing a bilingual broadcast
programme, you can choose the sound
from Bilingual I (sub I) or Bilingual II (sub II).
When the stereo broadcasting is received
poorly, you can change from stereo to mono
sound so that you can hear the broadcast
more clearly and easily.
:Stereo sound
: mono sound
: Bilingual I (sub I)
: Bilingual II (sub II)
MONO: Cancels the Multi Sound function,
and the sound becomes monaural.
The sound mode you can choose
differs depending on the TV
programme.
This function does not work in the
VIDEO modes.
You can also operate the STEREO /
I
II function with the
svt
/
u
button.
For details, see
svt
/
u
button
on
page 10.
Adjusting the sound
You can adjust the sound to your liking.
BASS
You can adjust the low tone of the sound.
2
: weaker
3
: stronger
TREBLE
You can adjust the high tone of the sound.
2
: weaker
3
: stronger
Item
Options
PICTURE MODE BRIGHT*, STANDARD,
SOFT
DIGITAL VNR
AUTO*, MAX, OFF, MIN
WHITE
BALANCE
COOL, MID*, WARM
DigiPure
AUTO*, MAX, OFF, MIN
PICTURE
EFFECT
ON:
Above picture effect
applies to the chosen
video input.
OFF*:
No picture effect applies.
