1-18 (No.YA387)
4.6.3.2
TV-MICRO SERVICE MODE
1. Adjust
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
(2) SCREEN MODE
State of the ASPECT is displayed.
(3) VIDEO STATUS
State of the VIDEO STATUS is displayed.
(4) WHITE BALANCE
State of the WHITE BALANCE is displayed.
(5) SETTING ITEM NAME
Setting item name are displayed. For the setting item names
to be displayed, refer to "INITIAL SETTING VALUE OF
SERVICE MODE".
(6) SETTING ITEM NO.
Setting item numbers are displayed. The setting item numbers
to be displayed are listed below.
SELECTION OF SETTING ITEM
•
[CH+]
/
[CH-]
key.
Change the setting items up/ down.
•
[SLEEP TIMER]
key.
Switch to the next items.
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
CHANGE OF SETTING VALUE (DATA)
•
[VOL+]
/
[VOL-]
key.
Change the setting values up/down.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing
[MUTING]
key.
NTSC
: 525i (Composite / S-video input)
525I
: 525i (Component input)
D525I
: ATSC 525i
D525P : ATSC 525p
D750P : ATSC 750p
D1125I : ATSC 1125i
43-4:3
: 4 : 3 (Input signal 4 : 3)
43-16:9
: 16 : 9 (Input signal 4 : 3)
16-16:9
: 16 : 9 (Input signal 16 : 9)
16-4:3
: 4 : 3 (Input signal 16 : 9)
16-ZOOM : HD ZOOM (Input signal 16 : 9)
STANDARD : STANDARD
DYNAMIC
: DYNAMIC
THEATER
: THEATER
GAME
: GAME
H : HIGH
L : LOW
SIGNAL SYSTEM
SCREEN MODE VIDEO STATUS
SETTING VALUE (DATA)
SETTING ITEM No.
SETTING ITEM
WHITE BALANCE
S001 BRIGHT 064
NTSC 43-4:3 STANDARD L
Item No.
Setting item
S001 - S045
Video system setting
D001 - D033
Deflection system
F001 - F003
Factory system setting
S001...
↔
D001...
↔
F001...
↔
S001...
S001
→
D001
→
F001
→
S001