JVC ImageMixer 1.7 Instructions Manual Download

Page: 36 / 43

Master Page: Left-Heading0

Appendix

VIDEO CONFERENCE OVER THE INTERNET

You can use Windows

NetMeeting

to conduct video conferences over the Internet, using a camcorder.

NOTE:

There are differences in the following procedures whether your camcorder is equipped with D.S.C. (Digital
Still Camera) features or not.

Preparation

Confirm that Windows

NetMeeting

3.0 or later and MSN Messenger Service are installed.

●

You can download the latest version of Windows

NetMeeting

or MSN Messenger Service from

Microsoft’s web site:

http://www.microsoft.com/

Install [USB Video Streaming driver].

●

Refer to “Software Installation (Windows

)” in “SOFTWARE INSTALLATION AND USB

CONNECTION GUIDE”.

●

If the installation of [USB Video Streaming driver] has already been completed, go to step

Make sure that no cassette is in the camcorder. (Only for D.S.C. non-equipped models)

Connect the camcorder to the PC with a USB cable.

●

Refer to “Connections (Windows

)” in “SOFTWARE INSTALLATION AND USB CONNECTION

GUIDE”.

Set the camcorder’s VIDEO/MEMORY Switch to “MEMORY”. (Only for D.S.C. equipped
models)

Set the camcorder’s Power Switch to “

” or “

” while pressing down the Lock Button

located on the switch.

The camcorder is now on.
“

” appears on the camcorder’s LCD monitor.

●

If “

” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation

(Windows

)” in “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE”.

NOTE:

The procedure is different when reading or writing a memory card.

(Only for D.S.C. equipped models)

Click [Start], go to [Settings] – [Control Panel], and then double click the [Multimedia] icon.

Select the [Audio] tab and click [JVC PIX-MCV Audio Capture] or [JVC PIX-MC10 Audio
Capture] in the [Preferred device] box.

Start NetMeeting

, and set up the program as instructed on the screen.

●

An environment that provides for connection to the Internet and an e-mail address are also required.

●

Select [JVC PIX-MCV Audio Capture] or [JVC PIX-MC10 Audio Capture] as a recording device in the
[Audio adjustment] wizard.

In the [Conference] menu, click [Directory].

The [Find Other Party] dialog box appears.

Register with HotMail as instructed on the screen.

Set up MSN Messenger as instructed on the screen.

●

If setup was completed previously, the MSN Messenger Service logon window appears.

Exit NetMeeting

and MSN Messenger Service.

Using Windows

NetMeeting

(Windows

Only)

CONTINUED ON NEXT PAGE

M4D3+DSC_Soft.book Page 36 Tuesday, December 16, 2003 2:08 PM

Summary of Contents for ImageMixer 1.7












































Search results

Summary of Contents for ImageMixer 1.7

Reviews:

Related manuals for ImageMixer 1.7

Brands by name

Popular brands

JVC ImageMixer 1.7, Instructions Manual

Search results

Summary of Contents for ImageMixer 1.7

Reviews:

Related manuals for ImageMixer 1.7

Brands by name

Popular brands