background image

FEATURES

29

 

3 Press the 

a

 button

The Sub-menu of CHILD LOCK appears.

4 Press the 

6

 buttons to choose a 

TV channel

Every time you press the 

6

 buttons, the 

Programme number (PR) changes, and the 

picture of the TV channel registered in the 
Programme number (PR) is displayed on 
the screen.

5 Press the blue button and set the 

CHILD LOCK function.

Then press the 

a

 button

n

 (CHILD LOCK) appears and the TV 

channel is locked.

To reset the CHILD LOCK function:

Press the blue button again.

n

 (CHILD LOCK) disappears.

To disable easy resetting of the CHILD 

LOCK function, the menu disappears if 
you choose the CHILD LOCK function 
and press the 

a

 button.

„

To view a locked TV channel

1 Choose a programme number (PR) 

of a locked TV channel with the 

number buttons or PR LIST

The screen changes to blue and the 

n

 

(CHILD LOCK) appears. You cannot 
view the TV channel.

2 Press the 

h

 (Information) button to 

display “ID NO.” (ID No. input 

screen)

3 Press the number buttons to enter 

the ID number

The lock is temporarily released so you 
can view the TV channel.

If you have forgotten the ID 

number:

Perform step 1 of “To set the CHILD 

LOCK function”. After confirming the ID 
number, press the 

b

 button to exit the 

menu.

• Even if you reset the lock temporarily, 

it does not mean that the CHILD 

LOCK function set for the TV channel 
is cancelled. The next time anyone 
tries to view the TV channel, it will be 

locked again.

• When you want to cancel the CHILD 

LOCK function, you must perform the 
operation “To set the CHILD LOCK 
function” again.

• To stop it being easy to choose the 

programme number (PR) of a locked 

TV channel, the programme number 
(PR) has been set so that it cannot be 
chosen with the 

6

 buttons or the 

buttons of the TV.

• To stop it being easy to reset the lock, 

“ID NO.” (ID No. input screen) is set 
so that it cannot appear unless you 
press the 

h

 (Information) button.

DECODER (EXT-2)

You can only use this function if you have a 
decoder connected to a T-V LINK 

compatible VCR, which in turn is connected 
to the EXT-2 terminal. To use this function, 
see “Using the DECODER (EXT-2) 

function” on page 36.

Caution

• If you have not connected a decoder with 

a T-V LINK compatible VCR to the EXT-2 

terminal, setting this function to “ON” by 

mistake causes the picture/sound of a TV 

channel you are currently viewing to 

disappear.

D0026-EK

CHILD LOCK

CH

PR

ID

AV

01

02

03

04

05

06

07

08

09

CH

CH

CH

CH

CH

CH

CH

CH

CH

21

22

23

24

25

26

27

28

29

BBC1

BBC2

ITV

CH4

CH5

LOCK

BACK

TV

OK

5

D0027-EN

5

ID NO . :

D0028-EN

AV-32&28X47HK.book  Page 29  Monday, January 26, 2004  3:47 PM

Summary of Contents for InteriArt AV-28X47HK












































Reviews: