10
-EN
• This shows an example of several possible connections. Also refer to the instruction books of the other components you are
using for operation and connection details.
Watching Video
Do not connect the AC power cord until all other connections have been made.
Connect a VCR to INPUT
1
of the JX-S333 and watch the video played back on the VCR.
Connection tips
• Before making any connections, turn off the power to all
components.
• It is not required to connect the components using both
S-VIDEO and component video connectors. To obtain the
best possible playback picture on the TV monitor, connect
the component using the component video connectors.
However, to use the LINK function (
☞
P. 20), it is required
to connect the playback components through the S-VIDEO
connectors.
• If both the S-VIDEO and component video connectors are
connected between the components, the incoming signals
are emitted through the respective output connectors.
(
☞
P. 7 “Video input/output signals”)
• Even though the playback components and the TV monitor
are connected through the different type of video
connectors (S-VIDEO/component video), you can watch
the playback picture. (
☞
P. 7 “Video input/output signals”)
:Signals
VCR (Playback deck)
TV monitor
JX-S333 rear panel
To
S-VIDEO Output
To
Component
Video Output
To
A
UDIO Output
To
S-VIDEO Input
To
A
UDIO Input
To Component Video Input
To S-VIDEO Input
To AUDIO Input
(red)
(white)
(red)
(white)
(red)
(white)
(red)
(white)
(b
lue)
(g
reen)
(red)
(b
lue)
(g
reen)
(red)
(red)
(white)
(red)
(white)
(blue)
(green)
(red)
(blue)
(green)
(red)
Connect to the OUTPUT connectors on the
JX-S333 so that the VCR can be used as a
recording machine.
• The INPUT
1
and INPUT
2
connectors are used for
connecting the playback/recording components. Incoming
signals from the INPUT
1
and INPUT
2
connectors are
emitted through the MONITOR OUT connectors and at
the same time...
– Signals from the INPUT
1
connectors are emitted
through the OUTPUT
2
connectors.
– Signals from the INPUT
2
connectors are emitted
through the OUTPUT
1
connectors.
• The INPUT
3
and
4
connectors are used only for
connecting the playback components. Incoming signals
from these connectors are emitted through all the output
connectors at the same time. DO NOT connect the input
connectors of the components connected to these
connectors to any of the output connectors of the JX-S333.
JX-S333e.p65
05.2.8, 2:50 PM
10
